{"product_id":"general-electric-ur-6ph-digital-i-o-module","title":"General Electric UR 6PH Digital I\/O Module","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric UR 6PH\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e6PH\u003c\/strong\u003e Digital I\/O module, operates as a dedicated hardware component for discrete signal processing and control execution within Multilin Universal Relay (UR) platforms. This module provides 6 Form A output contacts and 4 digital inputs, facilitating the command of substation equipment and the acquisition of critical system status data.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eUR 6PH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.36 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard UR module footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard environment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on relay coil state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital Inputs\u003c\/td\u003e\n\u003ctd\u003e4 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay Outputs\u003c\/td\u003e\n\u003ctd\u003e6 Form A (SPST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eDigital I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Platform\u003c\/td\u003e\n\u003ctd\u003eMultilin Universal Relay (UR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Logic Integration\u003c\/h3\u003e\n\u003cp\u003eThe UR 6PH integrates with the relay backplane bus to synchronize discrete I\/O states with the protection logic executed by the CPU. The module supports routable GOOSE messaging, enabling fast, deterministic communication across substation networks. Technical personnel must ensure that the host relay chassis firmware is configured to recognize the 6PH module to enable the integrated metering and event recording functions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Are the 6 Form A relay outputs suitable for direct control of high-power circuit breaker trip coils?\u003c\/p\u003e\n\u003cp\u003eA: The Form A contacts are designed for control-level switching. If the load current or voltage exceeds the relay contact ratings, auxiliary interposing relays must be utilized to prevent contact degradation or welding.\u003c\/p\u003e\n\u003cp\u003eQ: Can this module be hot-swapped while the substation relay is active?\u003c\/p\u003e\n\u003cp\u003eA: No. The UR 6PH is not designed for hot-swapping. The relay must be de-energized to prevent electrical damage to the backplane connectors and to ensure that input status and output states remain consistent during the module exchange.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the Multilin UR relay chassis power is isolated and that no external energy sources are present on the I\/O terminals.\u003c\/li\u003e\n\u003cli\u003eAlign the UR 6PH module with the designated chassis slot, ensuring the backplane pins are properly oriented to prevent damage.\u003c\/li\u003e\n\u003cli\u003eSlide the module into the chassis until the connectors are fully seated and secure the front-panel captive screws to provide structural stability.\u003c\/li\u003e\n\u003cli\u003eTerminate digital input and output wiring to the terminal blocks, ensuring that all conductors are properly identified according to the site wiring diagrams.\u003c\/li\u003e\n\u003cli\u003eUse the EnerVista UR software to map the 4 digital inputs and 6 relay outputs to the specific protection or control logic schemes required by the substation.\u003c\/li\u003e\n\u003cli\u003eVerify the operational state of the I\/O points and the communication health of the module via the relay’s front-panel display before placing the unit into service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52620252283192,"sku":"UR 6PH","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/UR6PH.jpg?v=1739352975","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ur-6ph-digital-i-o-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}