{"product_id":"general-electric-ur-9nh-cpu-module","title":"General Electric UR 9NH CPU Module","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric UR 9NH\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e9NH\u003c\/strong\u003e CPU module, operates as a dedicated hardware component for high-performance logic processing and system management within Multilin Universal Relay (UR) platforms. This processor module serves as the primary computational engine, executing complex protection algorithms, managing real-time data acquisition from I\/O subsystems, and coordinating deterministic communications across the relay's backplane bus.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eUR 9NH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.86 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e6 cm x 20 cm x 17.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard environment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on processor load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eCPU \/ Processor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Platform\u003c\/td\u003e\n\u003ctd\u003eMultilin Universal Relay (UR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Firmware Integrity\u003c\/h3\u003e\n\u003cp\u003eThe UR 9NH interfaces with the relay backplane to synchronize high-speed data exchanges between input signal processors and output control modules. The processor architecture is optimized for sub-cycle response times, ensuring rapid fault detection and clearing in power distribution networks. Firmware flash compatibility is critical for this module; users must ensure that the installed system software version is fully compatible with the UR 9NH hardware revision to prevent initialization failures or timing drift during high-load operating conditions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the UR 9NH be hot-swapped while the protective relay is in operation?\u003c\/p\u003e\n\u003cp\u003eA: No. The UR 9NH CPU module is not designed for hot-swapping. The power to the relay chassis must be completely isolated before attempting to remove or install the CPU to avoid electrical damage to the backplane connectors and to ensure the stability of stored relay settings.\u003c\/p\u003e\n\u003cp\u003eQ: How can the status of the CPU module be verified during system runtime?\u003c\/p\u003e\n\u003cp\u003eA: The module maintains continuous internal diagnostic routines. System status, memory integrity, and communication port health can be monitored in real-time through the relay’s front-panel display or via the remote EnerVista UR software interface.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the Multilin UR chassis is de-energized and all external control power sources are isolated.\u003c\/li\u003e\n\u003cli\u003eUtilize an anti-static wrist strap throughout the installation process to prevent electrostatic damage to the processor circuitry.\u003c\/li\u003e\n\u003cli\u003eCarefully align the UR 9NH module with the dedicated CPU slot guides in the chassis.\u003c\/li\u003e\n\u003cli\u003ePress the module firmly into the backplane until the rear connectors are fully seated and the mechanical locking latches engage.\u003c\/li\u003e\n\u003cli\u003eRestore power and monitor the front-panel diagnostic indicators to confirm the successful completion of the boot-up self-test sequence.\u003c\/li\u003e\n\u003cli\u003eVerify that the relay firmware and configuration files are correctly loaded and mapped to the new module before returning the protection relay to active service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52620242125112,"sku":"UR 9NH","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/UR9NH2.jpg?v=1783497524","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ur-9nh-cpu-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}