{"product_id":"i-o-analog-board-general-electric-ds200tccbg8bed","title":"I\/O Analog Board General Electric DS200TCCBG8BED","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200TCCBG8BED\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200TCCBG8BED\u003c\/strong\u003e I\/O TC2000 Analog Board, operates as a dedicated hardware component for analog signal processing and I\/O management within Mark V turbine control platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200TCCBG8BED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.65kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore Function\u003c\/td\u003e\n\u003ctd\u003eAnalog I\/O processing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200TCCBG8BED\u003c\/strong\u003e integrates with the Mark V backplane to facilitate deterministic analog data acquisition. The module utilizes high-speed I\/O density scaling to manage complex sensor inputs while maintaining synchronization with the central controller. Firmware flash compatibility is contingent upon the revision level of the TC2000 hardware architecture; utilizing the module with an incompatible firmware version will result in I\/O scanning errors or total communication failure on the backplane bus. The analog signal chain requires precise calibration to ensure that signal conversion latencies remain within the specified operational tolerances of the Mark V control network.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this board be configured for different input signal ranges?\u003c\/p\u003e\n\u003cp\u003eA: Hardware configuration for input ranges is determined by the board's physical jumper settings and software-defined calibration parameters within the Mark V system configuration files.\u003c\/p\u003e\n\u003cp\u003eQ: Is this module capable of being hot-swapped during active turbine control?\u003c\/p\u003e\n\u003cp\u003eA: No. Any extraction or insertion of the board must be performed while the control rack is fully de-energized to prevent electrical damage to the backplane communication pins and to avoid unintended signal activation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Secure the board into the assigned Mark V chassis slot using the built-in locking mechanisms to ensure the backplane connector is fully seated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: Ensure the board chassis is properly bonded to the cabinet ground to minimize electromagnetic interference (EMI) affecting the analog precision circuitry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding\u003c\/strong\u003e: All analog input signals must utilize shielded twisted-pair cabling. Terminate shields at the cabinet earth ground bus to maintain signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Wiring\u003c\/strong\u003e: Avoid routing analog instrumentation lines parallel to high-power motor cables or AC supply lines to prevent inductive coupling and signal distortion.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52596476346680,"sku":"DS200TCCBG8BED","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TCCBG8BED.jpg?v=1782980885","url":"https:\/\/www.automodulexpert.com\/products\/i-o-analog-board-general-electric-ds200tccbg8bed","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}