{"product_id":"ic200alg260-ge-fanuc-analog-input-module-new-original-stock","title":"IC200ALG260 GE Fanuc Analog Input Module New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc IC200ALG260\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIC200ALG260\u003c\/strong\u003e Analog Input Module, operates as a dedicated hardware component for multi-channel analog signal acquisition within Versamax control networks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200ALG260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc Emerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSubject to manufacturing batch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.56 lbs (0.26 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Versamax I\/O form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDefined by backplane load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Count\u003c\/td\u003e\n\u003ctd\u003eMulti-channel analog input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IC200ALG260 facilitates analog-to-digital signal processing for integration into Profinet or EtherNet\/IP deterministic networks. The module utilizes the Versamax backplane bus to transmit digitized process data to the CPU with minimal latency. To maintain deterministic performance, the module's scan cycle must be configured within the PLC register mapping. Firmware flash compatibility is required to ensure that internal scaling and filtering algorithms align with the control loop requirements, particularly when deployed in high-density I\/O clusters that necessitate synchronized data acquisition across multiple network nodes.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IC200ALG260 support channel-to-channel isolation?\u003c\/p\u003e\n\u003cp\u003eA: Design specifications for this module typically utilize common-mode referencing; please refer to the product technical manual for specific isolation ratings to determine if external signal conditioning is necessary for your implementation.\u003c\/p\u003e\n\u003cp\u003eQ: Is this module capable of remote firmware updates?\u003c\/p\u003e\n\u003cp\u003eA: Yes, firmware updates can be performed via the system communication port; verify that the update utility is compatible with the module's current hardware revision level.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify that all input signal wiring is shielded and that the shield is grounded at a single, low-impedance point to mitigate EMI and noise.\u003c\/li\u003e\n\u003cli\u003eEnsure the module is firmly locked onto the DIN-rail carrier to prevent mechanical stress on the backplane connector pins.\u003c\/li\u003e\n\u003cli\u003eRoute analog signal pairs away from high-current AC cabling and frequency drive outputs to prevent induced signal fluctuations.\u003c\/li\u003e\n\u003cli\u003eCheck terminal tightness after installation to confirm that wire contact resistance does not introduce offset errors in analog readings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52451070247224,"sku":"IC200ALG260H","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IC200ALG260D.jpg?v=1780040074","url":"https:\/\/www.automodulexpert.com\/products\/ic200alg260-ge-fanuc-analog-input-module-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}