{"product_id":"ic200alg430h-ge-analog-mixed-i-o-module-new-original-stock","title":"IC200ALG430H GE Analog Mixed I\/O Module New \u0026 Original Stock","description":"\u003cp\u003eConfigured for high-density analog signal processing in VersaMax control networks, the \u003cstrong\u003eGE IC200ALG430H\u003c\/strong\u003e (\u003cstrong\u003eIC200ALG430H\u003c\/strong\u003e Analog Mixed I\/O Module) provides direct physical\/electrical execution. The module facilitates simultaneous acquisition of 4 analog current inputs and the command of 2 analog current outputs. It integrates directly into the PLC backplane to perform real-time conversion and signal conditioning for process control loops.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200ALG430H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.35 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e110 x 66.8 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e50 mA at 5 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e12-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IC200ALG430H utilizes a high-speed backplane interface to maintain communication velocity consistent with industrial deterministic network requirements. The architecture supports a 0.4 ms input update rate and a 0.3 ms output update rate, ensuring minimal loop latency. Firmware flash compatibility allows for internal calibration updates, while the 12-bit resolution provides the necessary granularity for precise current loop control. The module maintains galvanic isolation up to 250 VAC continuous to protect sensitive field instrumentation from backplane electrical noise.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the module require an external power supply for all functions?\u003c\/p\u003e\n\u003cp\u003eA: An external supply of 9.6-15 VDC is required specifically for the operation of the analog output channels. The input channels draw operating power directly from the backplane.\u003c\/p\u003e\n\u003cp\u003eQ: Is the input wiring scheme compatible with non-differential field devices?\u003c\/p\u003e\n\u003cp\u003eA: The inputs are differential, which provides superior noise rejection in industrial environments. If connecting a single-ended signal source, ensure the return path is properly referenced to the module's common terminal to prevent floating inputs.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the module on a standard DIN rail, ensuring the locking lever is fully engaged to provide mechanical stability.\u003c\/li\u003e\n\u003cli\u003eUtilize shielded, twisted-pair cabling for all 4-20 mA loops; ground the shield at a single point to prevent ground loops that introduce signal jitter.\u003c\/li\u003e\n\u003cli\u003eVerify the nominal 12 VDC external supply voltage before wiring the output terminals to avoid damage to the current drive circuitry.\u003c\/li\u003e\n\u003cli\u003eEnsure that the input filter response of 5 ms is considered when programming high-speed PID loops or time-sensitive process safety triggers.\u003c\/li\u003e\n\u003cli\u003eKeep signal wiring physically separated from high-current AC power cables to minimize inductive interference and maintain measurement accuracy within the specified range.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52432162849080,"sku":"IC200ALG430H","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IC200ALG430H1.jpg?v=1779953580","url":"https:\/\/www.automodulexpert.com\/products\/ic200alg430h-ge-analog-mixed-i-o-module-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}