{"product_id":"ic200chs002k-ge-versamax-box-style-i-o-carrier-brand-new-original-stock","title":"IC200CHS002K GE VersaMax Box-Style I\/O Carrier Brand New Original Stock,","description":"\u003cp\u003eConfigured for high-density signal distribution in industrial control networks, the \u003cstrong\u003eGE VersaMax IC200CHS002K\u003c\/strong\u003e (\u003cstrong\u003eIC200CHS002K\u003c\/strong\u003e Box-Style I\/O Carrier Module) provides direct physical\/electrical execution for module-to-backplane interfacing.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eIC200CHS002K\u003c\/strong\u003e represents the standard box-style terminal configuration for the VersaMax I\/O system. This carrier supports 36 barrier-style terminals (A1–A18 and B1–B18), designed to facilitate dense wiring schemes for digital and analog I\/O modules. The \"K\" suffix denotes the specific terminal block arrangement and material compliance standard for industrial operating environments.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eModel\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eIC200CHS002K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eBrand\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eGE VersaMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003eOrigin\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eSubject to factory batch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003eWeight\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e0.69 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003eDimensions\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e110.5 x 70 x 139.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eOperating Temp\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003e805 mA typical; 2.48 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003e2 A per point; 8 A total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003eVoltage Range\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003e0–264 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"11\"\u003eMounting Type\u003c\/td\u003e\n\u003ctd data-row=\"11\"\u003eDIN rail (horizontal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eBackplane Bus Communication and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe carrier provides the physical backplane bus interface necessary for high-speed data transfer between the field modules and the CPU. It supports backplane bus communication velocity standards required by the VersaMax I\/O suite. As a passive interconnection component, the carrier does not require firmware flash compatibility; however, it is engineered to maintain signal integrity for deterministic network operations. The mechanical coupling ensures that I\/O density scaling remains consistent across the rack, allowing for modular expansion without introducing propagation delays.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the carrier support mixed voltage signal types? A: The carrier is rated up to 264 VAC, but users must ensure that all signals wired to the terminal block are properly segregated and conform to site safety standards regarding mixed-voltage isolation within a single enclosure.\u003c\/p\u003e\n\u003cp\u003eQ: Are there specific torque requirements for the terminal screws? A: Yes, terminal connections must be tightened to the manufacturer's specified torque rating to ensure a secure mechanical bond and low-resistance electrical contact for copper wires ranging from AWG #22 to #14.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the carrier on a horizontal 35 mm DIN rail, ensuring a minimum clearance of 5.1 cm at the top\/bottom and 2.54 cm at the sides for adequate thermal dissipation.\u003c\/li\u003e\n\u003cli\u003eStrip wires to the recommended length and ensure solid or stranded copper conductors are properly seated under the terminal plates to prevent loose connections.\u003c\/li\u003e\n\u003cli\u003eFor dual-wire installations, verify that both conductors are of the same size, up to 0.86 mm² (AWG #18), to ensure uniform clamping pressure.\u003c\/li\u003e\n\u003cli\u003eEnsure the backplane connector is fully engaged with the adjacent module or CPU to prevent intermittent bus communication.\u003c\/li\u003e\n\u003cli\u003eVerify that the cabinet enclosure depth is at least 70 mm to accommodate the carrier footprint and associated wiring bend radii.\u003c\/li\u003e\n\u003cli\u003eAdhere to standard electromagnetic compatibility practices by isolating signal wiring from high-power circuits and grounding the DIN rail to a common chassis point.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52426133143864,"sku":"IC200CHS002K","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IC200CHS002K.jpg?v=1779781438","url":"https:\/\/www.automodulexpert.com\/products\/ic200chs002k-ge-versamax-box-style-i-o-carrier-brand-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}