{"product_id":"ic200gbi001-gj-ge-fanuc-genius-network-interface","title":"IC200GBI001-GJ GE Fanuc Genius Network Interface","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc IC200GBI001-GJ\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIC200GBI001-GJ\u003c\/strong\u003e Genius Network Interface Unit, operates as a dedicated hardware component for fieldbus data translation within Versamax platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IC200GBI001-GJ features the \"GJ\" suffix, denoting a specialized hardware revision configured for standard Genius bus communication profiles. This model integrates directly into the Versamax backplane, providing a gateway for remote I\/O connectivity over the legacy Genius fieldbus architecture.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200GBI001-GJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc Emerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eRefer to device label\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.38 lbs (0.17 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Versamax module footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5 VDC backplane current consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eGenius Network Interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IC200GBI001-GJ governs the synchronization of I\/O data frames between the Genius network and the internal Versamax backplane bus. The module utilizes fixed-rate scanning, with communication velocity dependent on the selected Genius bus speed (typically 153.6 kbps, 76.8 kbps, or 38.4 kbps). Firmware flash compatibility is required to ensure the interface correctly maps remote I\/O points to the PLC memory addresses during the controller scan cycle. Maintaining deterministic behavior requires verifying that the total bus load does not exceed the transmission capacity for the chosen bit rate.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this module support hot-swap capabilities in an active Genius bus network?\u003c\/p\u003e\n\u003cp\u003eA: The module supports hot-swapping; however, extracting the IC200GBI001-GJ will result in an immediate communication loss for all associated I\/O modules on that specific node, triggering a fault condition in the host controller.\u003c\/p\u003e\n\u003cp\u003eQ: How is the Genius bus termination configured for this unit?\u003c\/p\u003e\n\u003cp\u003eA: The Genius bus termination must be handled by external resistors connected to the bus cables at the physical extremities of the network; this module does not provide internal selectable bus termination.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify the Genius bus cable shielding is continuous and properly bonded to the system earth at the designated ground points to mitigate electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eEnsure the module is fully seated on the Versamax terminal base to guarantee stable power delivery from the 5 VDC backplane.\u003c\/li\u003e\n\u003cli\u003eUtilize the rotary switches on the module faceplate to set the correct bus address and baud rate before applying power to the Genius network.\u003c\/li\u003e\n\u003cli\u003eInspect the terminal connections for oxidation or looseness, particularly in environments subject to thermal cycling, which can increase line impedance.\u003c\/li\u003e\n\u003cli\u003eMaintain physical separation between the Genius bus cabling and high-voltage power lines to prevent induced noise, which may manifest as intermittent \"bus-off\" errors.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52443428716856,"sku":"IC200GB1001-GJ","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IC200GB10012.jpg?v=1779699804","url":"https:\/\/www.automodulexpert.com\/products\/ic200gbi001-gj-ge-fanuc-genius-network-interface","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}