{"product_id":"ic200mdl330h-ge-fanuc-discrete-output-module-datasheet-technical-manual","title":"IC200MDL330H GE Fanuc Discrete Output Module Datasheet \u0026 Technical Manual","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc IC200MDL330H\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIC200MDL330H\u003c\/strong\u003e Discrete Output Module, operates as a dedicated hardware component for 120 VAC load switching within VersaMax platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IC200MDL330H represents a fixed-configuration discrete output module. The \"H\" suffix identifies the revision level, indicating standard environmental hardening specifications compliant with the full VersaMax industrial series architecture.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200MDL330H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eRefer to device label\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.64 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100 mm x 80 mm x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e16 discrete isolated outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Current\u003c\/td\u003e\n\u003ctd\u003e0.5 A per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e120 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IC200MDL330H module supports deterministic operation through the VersaMax backplane bus. When integrated into Modbus TCP\/IP architectures, the module performs packet-to-output state translation synchronous with the controller scan cycle. The firmware compatibility ensures that output updates occur within defined network latency bounds, preventing timing drifts during the excitation of inductive loads such as relays or solenoids. Proper backplane bus communication velocity must be maintained to ensure consistent state execution across the 16-point output array.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Are the output channels galvanically isolated from each other?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the IC200MDL330H features individual channel isolation, which prevents cross-channel electrical interference and protects the internal circuitry during a load-side short circuit.\u003c\/p\u003e\n\u003cp\u003eQ: Can the module be hot-swapped while the system is powered?\u003c\/p\u003e\n\u003cp\u003eA: The VersaMax system architecture supports hot-swapping; however, users must ensure that external field power to the module is disconnected before physical extraction to prevent arcing at the terminal block contacts.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSecure the module onto the DIN rail or panel mount and ensure the connector locking tabs are fully engaged to guarantee low-resistance backplane contact.\u003c\/li\u003e\n\u003cli\u003eDue to the 120 VAC output nature, ensure that all field wiring is routed in conduits separate from low-voltage DC communication or signal cables to prevent inductive crosstalk.\u003c\/li\u003e\n\u003cli\u003eUtilize appropriate suppression devices for highly inductive loads to minimize contact wear and electrical noise injection.\u003c\/li\u003e\n\u003cli\u003eVerify that the external load current does not exceed 0.5 A per channel; utilize external fusing for every output point to provide localized overcurrent protection.\u003c\/li\u003e\n\u003cli\u003ePeriodically inspect the status LEDs; a constant \"OK\" indicator confirms backplane power and logic health, while channel-specific LEDs provide immediate feedback on the commanded output state.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52443209990456,"sku":"IC200MDL330H","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IC200MDL330.jpg?v=1779350443","url":"https:\/\/www.automodulexpert.com\/products\/ic200mdl330h-ge-fanuc-discrete-output-module-datasheet-technical-manual","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}