{"product_id":"ic200uex636-c-ge-fanuc-analog-expansion-unit-new-original-stock","title":"IC200UEX636-C GE Fanuc Analog Expansion Unit New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc IC200UEX636\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIC200UEX636\u003c\/strong\u003e Analog Expansion Unit, operates as a dedicated hardware component for analog signal acquisition and scaling within VersaMax Micro automation platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eModel\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003eIC200UEX636\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eBrand\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eGE Fanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003eOrigin\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eSubject to individual unit labeling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003eWeight\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e0.25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003eDimensions\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003eStandard VersaMax Micro expansion form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eOperating Temp\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003eSubject to standard industrial ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003eDerived from base controller backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003eI\/O Type\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003eAnalog Expansion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePLC Platform Compatibility and Bus Communication\u003c\/h3\u003e\n\u003cp\u003eThe IC200UEX636 connects to the VersaMax Micro controller via the internal expansion bus to increase the analog I\/O density of the control system. Firmware flash compatibility is managed through the host controller to ensure that the backplane bus communication velocity remains synchronized with the base unit's scan cycle. System engineers must verify that the base controller’s configuration supports the specific I\/O density scaling required by this expansion unit to ensure correct register mapping. The unit processes analog signals into digital values, maintaining consistent resolution across the control architecture.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this unit require its own power supply?\u003c\/p\u003e\n\u003cp\u003eA: The expansion unit typically draws logic power from the base controller's backplane, but analog field devices may require a separate external power supply to ensure proper signal loop excitation.\u003c\/p\u003e\n\u003cp\u003eQ: Can multiple IC200UEX636 units be chained together?\u003c\/p\u003e\n\u003cp\u003eA: Expansion is limited by the physical and electrical constraints of the base controller's expansion bus. Consult the VersaMax Micro hardware manual to determine the maximum number of supported expansion units.\u003c\/p\u003e\n\u003cp\u003eQ: Is calibration required for the analog inputs?\u003c\/p\u003e\n\u003cp\u003eA: The unit is factory-calibrated. However, field verification of offset and gain settings in the PLC programming software is recommended during commissioning to account for lead resistance and signal transducer variations.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Ensure the expansion unit is securely attached to the base controller or side-mounted expansion carrier. Verify that the internal bus connector is fully seated to maintain reliable signal communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Use shielded, twisted-pair cabling for all analog signals to minimize noise pickup. Ground the shield at one end only—preferably at the PLC cabinet earth bus—to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparation:\u003c\/strong\u003e Keep analog signal wiring physically separated from high-voltage AC lines and high-current DC motor wiring to prevent inductive interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Connect the chassis ground terminal to a low-impedance earth ground. This provides the necessary return path for common-mode noise rejection in high-EMI environments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52422539837752,"sku":"IC200UEX636-C","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IC200UEX636-C.jpg?v=1779699803","url":"https:\/\/www.automodulexpert.com\/products\/ic200uex636-c-ge-fanuc-analog-expansion-unit-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}