{"product_id":"ic670mdl930-relay-output-module-general-electric","title":"IC670MDL930 Relay Output Module General Electric","description":"\u003cp\u003eConfigured for high-isolation load switching in Field Control networks, the \u003cstrong\u003eGeneral Electric IC670MDL930\u003c\/strong\u003e (\u003cstrong\u003eIC670MDL930\u003c\/strong\u003e Relay Module) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IC670MDL930 is a standard relay output unit. There are no configurable hardware sub-variants or functional suffixes associated with this catalog number in the current technical documentation.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC670MDL930\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.1 cm x 10.2 cm x 7.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard environment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eBIU backplane dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRelay Output Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet and EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IC670MDL930 integrates into the Field Control bus architecture to provide deterministic relay state control. The module interface facilitates communication between the Bus Interface Unit (BIU) and the physical relay output terminals. Because relay switching involves mechanical contact movement, deterministic system design must account for the inherent switching latency of the electromechanical components. Firmware flash compatibility is critical to ensure that output state changes are mapped correctly within the cyclic I\/O scan, ensuring consistent response times across the control network.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can this module be used to switch high-inductive loads?\u003c\/p\u003e\n\u003cp\u003eA: Mechanical relays are susceptible to contact pitting when switching high-inductive loads. It is recommended to use external arc suppression (such as RC snubbers) to extend the relay contact lifespan.\u003c\/p\u003e\n\u003cp\u003eQ: How is the relay status reported to the host controller?\u003c\/p\u003e\n\u003cp\u003eA: The module reports output states via the internal backplane bus to the BIU, which integrates this data into the controller's I\/O image table for real-time logic processing.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSecure the terminal base to a vibration-dampened DIN rail to prevent unnecessary mechanical stress on the relay components.\u003c\/li\u003e\n\u003cli\u003eAlign the module housing carefully with the terminal base guide pins before seating the backplane pins to avoid connector misalignment.\u003c\/li\u003e\n\u003cli\u003eVerify that all field-side wiring is rated for the expected current and voltage loads, adhering to the module's maximum switching capacity.\u003c\/li\u003e\n\u003cli\u003eRoute field wiring away from high-speed digital signal lines to prevent mechanical switching noise from coupling into sensitive analog or low-voltage input circuits.\u003c\/li\u003e\n\u003cli\u003eApply correct torque to terminal screws to ensure gas-tight connections, preventing contact resistance issues over the lifecycle of the relay module.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52624204529976,"sku":"IC670MDL930","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IC670MDL9302.jpg?v=1783584424","url":"https:\/\/www.automodulexpert.com\/products\/ic670mdl930-relay-output-module-general-electric","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}