Product Overview

The IC697MDL740 is a high-current discrete output module designed for the GE Fanuc Series 90-70 PLC system. It offers 16 output points capable of controlling industrial actuators such as solenoids, motor starters, and indicators. With an operating voltage range of 20 to 60 VDC and a current rating of up to 2 Amps per point, this module is perfect for driving heavy electrical loads that standard low-power modules cannot handle. 100% brand new to ensure reliable and high-performance switching for your control circuits.

Technical Specifications

Engineering Advantages

• High-Capacity Power Switching: The 2 Amp per point current rating enables the module to directly control larger DC solenoids and contactors. This eliminates the need for additional relays, reducing both wiring complexity and overall system cost.

• Ultra-Low Voltage Drop: With an on-state voltage drop of less than 1 Volt, the module ensures that maximum power is delivered to field devices, especially critical for devices placed at the end of long cable runs.

• High-Speed Actuation: With a 2-millisecond response time, the IC697MDL740 is ideal for applications requiring fast switching, such as high-speed sorting, packaging, and safety interlocking.

• Comprehensive Group Isolation: The 16 outputs are split into groups with a high current-carrying capacity of 4 Amps per group. This design helps isolate different power circuits or voltage sources, enhancing safety and minimizing fault propagation within the system.

FAQs

1. Can I use this module for 12V DC applications?
No, the module requires a minimum of 20 VDC for proper operation. Using it below this voltage may result in erratic behavior or failure to activate connected devices.

2. How does the module handle short circuits in the field?
The IC697MDL740 does not have internal short-circuit protection. It is recommended to install external fuses for each output or group to protect the module from high-current faults and wiring errors.

3. Is this module compatible with RX3i systems?
The IC697MDL740 is designed for the Series 90-70 (VME-based) system. While it can be installed in RX3i conversion racks, it is primarily intended for use in IC697 chassis with Series 90-70 CPUs.

4. What do the front-panel LEDs indicate?
The module includes a row of 16 LEDs to show the ON/OFF status of each individual output point. A separate "Module OK" LED indicates the internal diagnostics have passed, and the module is successfully communicating with the CPU.