{"product_id":"iniet800-abb-ethernet-communication-interface-module","title":"INIET800 ABB Ethernet Communication Interface Module","description":"\u003ch2\u003eABB INIET800 Symphony Plus Ethernet Communication Interface\u003c\/h2\u003e\n\u003cp\u003eConfigured for high-speed Ethernet communication and control network integration in ABB AC 800M Controller and Symphony Plus systems, the \u003cstrong\u003eABB INIET800\u003c\/strong\u003e (\u003cstrong\u003eINIET800\u003c\/strong\u003e Industrial Ethernet Communication Interface) provides direct physical\/electrical execution. The module utilizes dual 10\/100 Mbps RJ-45 ports to process TCP\/IP, UDP\/IP, and Modbus\/TCP network frames directly through the controller backplane. Operating on 24 VDC backplane power, the module manages host-to-controller data transfer while executing hardware-level network redundancy across split LAN topologies.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eINIET800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eINIET800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e139.7 mm x 88.9 mm x 215.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e3 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC (via backplane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Ports\u003c\/td\u003e\n\u003ctd\u003e2 x 10\/100 Mbps Ethernet (RJ-45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocols\u003c\/td\u003e\n\u003ctd\u003eTCP\/IP, UDP\/IP, HTTP, SNMP, Modbus\/TCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20 (IEC 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Networks and Ethernet Backplane Isolation\u003c\/h3\u003e\n\u003cp\u003eThe INIET800 maintains Profinet and EtherNet\/IP deterministic networks performance by routing field bus frames via galvanically isolated communication channels. Channel-to-bus electrical isolation blocks common-mode ground noise from penetrating the internal backplane, protecting CPU timing cycles and maintaining firmware flash compatibility during high-throughput Modbus\/TCP or SNMP polling sequences. Integrated link and activity LEDs deliver continuous real-time diagnostic telemetry to monitor packet traffic and active link redundancy without requiring external software tools.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the INIET800 interface support dual redundant network topologies without dropping active Modbus\/TCP sessions?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the dual RJ-45 Ethernet interfaces support redundant LAN configurations, allowing instantaneous hardware failover between network channels if one cable link experiences physical disruption.\u003c\/p\u003e\n\u003cp\u003eQ: How does the INIET800 module receive its operational power inside the controller rack?\u003c\/p\u003e\n\u003cp\u003eA: The unit draws power directly from the 24 VDC internal supply rail generated by the AC 800M controller backplane, consuming approximately 3 W under full load.\u003c\/p\u003e\n\u003cp\u003eQ: Can maintenance personnel hot-swap the INIET800 module during active backplane operation?\u003c\/p\u003e\n\u003cp\u003eA: Maintenance procedures require powering down or verifying backplane bus isolation guidelines prior to module extraction to ensure firmware flash parameters and network node addresses clear safely.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003ePosition the INIET800 module onto the controller housing assembly, ensuring full engagement with the backplane connectors. Route Category 5e or Category 6 Ethernet cables through separate wiring channels to preserve isolation and avoid electromagnetic interference from high-voltage motor circuits. Fasten all field enclosure panels to guarantee an IP20 baseline rating and maintain cabinet ambient temperatures between 0 and +55 deg C. Ground all Ethernet cable shielding directly to the cabinet ground bar to prevent ground potential variations from interrupting data transmission.\u003c\/p\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":52938983145784,"sku":"INIET800","price":188.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/556..jpg?v=1789109592","url":"https:\/\/www.automodulexpert.com\/products\/iniet800-abb-ethernet-communication-interface-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}