{"product_id":"is200acleh1bcb-general-electric-application-control-module-new-original-stock","title":"IS200ACLEH1BCB General Electric Application Control Module | New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric IS200ACLEH1BCB\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS200ACLEH1\u003c\/strong\u003e Application Control Layer Module, operates as a dedicated hardware component for executing control logic processing within Mark VIe turbine control system networks. This module handles real-time data flow and instruction execution between the control layer and the field-level I\/O communication bus.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200ACLEH1BCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e14.75 cm x 9.50 cm x 3.50 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e12 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor Interface\u003c\/td\u003e\n\u003ctd\u003eEthernet \/ I\/O Data Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eChassis Slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe module maintains synchronization with the controller backplane bus communication velocity to ensure deterministic I\/O data processing across the control network. Firmware flash compatibility is managed via the controller hardware management software; version mismatches between the ACLE module and the I\/O processor can lead to diagnostic alarm states or communication timeouts. The module utilizes high-speed buffers to manage data packets, ensuring that the control layer operations remain synchronized with the primary processor scan time.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the IS200ACLEH1BCB module capable of hot-swapping during normal system operation?\u003c\/p\u003e\n\u003cp\u003eA: The module supports hot-swapping within the Mark VIe chassis, provided that the associated processor has been notified of the intent to remove the module and the communication link has been logically isolated via the control software.\u003c\/p\u003e\n\u003cp\u003eQ: How is the firmware version verified for this application control module?\u003c\/p\u003e\n\u003cp\u003eA: Firmware identification and verification must be performed using the GE ToolboxST software suite, which queries the module over the Ethernet diagnostic port to retrieve current software versioning and status bits.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Discharge Prevention:\u003c\/strong\u003e Always use an anti-static wrist strap connected to a verified earth ground before handling the module to prevent damage to the onboard integrated circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Alignment:\u003c\/strong\u003e Ensure the module is properly keyed and aligned with the backplane connector before applying pressure to engage the locking mechanisms; do not force the module into the slot if misalignment is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Cabling:\u003c\/strong\u003e Use shielded CAT5e or higher grade Ethernet cabling for the diagnostic and system ports; ensure cable bend radii do not exceed manufacturer specifications to maintain communication signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Environment:\u003c\/strong\u003e Maintain the control cabinet ambient temperature within the range of 0 to 60 deg C and ensure the cooling fan assemblies are operational to prevent localized heat buildup near the control layer hardware.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52493443105080,"sku":"IS200ACLEH1BCB","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200ACLEH1BCB.jpg?v=1781165691","url":"https:\/\/www.automodulexpert.com\/products\/is200acleh1bcb-general-electric-application-control-module-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}