{"product_id":"is200aepbh1b-general-electric-pcb-board-new-original-stock","title":"IS200AEPBH1B General Electric PCB Board | New \u0026 Original Stock","description":"\u003cp\u003eConfigured for signal interface and control logic processing within GE Fanuc turbine control platforms, the \u003cstrong\u003eGeneral Electric IS200AEPBH1B\u003c\/strong\u003e (\u003cstrong\u003eIS200AEPBH1B\u003c\/strong\u003e PCB Board) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IS200AEPBH1B identifier defines the hardware baseline for this control interface board. The \"H1B\" suffix denotes the specific board revision level, which incorporates optimized signal pathing and component placement standards to support the operational requirements of the Mark VI control system. This module serves as a critical interface component for I\/O pack communication.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200AEPBH1B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric (GE Fanuc)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Mark VI PCB form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem-dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent Type\u003c\/td\u003e\n\u003ctd\u003eSignal Processing Interface Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe IS200AEPBH1B facilitates high-speed data exchange across the Mark VI backplane bus, serving as a gateway for control signal traffic between the field interface and the system processor. It supports deterministic backplane bus communication velocity to ensure real-time responsiveness for turbine regulation logic. Firmware flash compatibility is managed by the system controller, which coordinates the logic state of the board during startup sequences. The PCB layout maintains high-impedance isolation to minimize electromagnetic interference during high-frequency data transmission cycles.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is this board compatible with legacy Mark VI systems?\u003c\/p\u003e\n\u003cp\u003eA: Compatibility is determined by the specific hardware revision of the host rack. Ensure the IS200AEPBH1B revision matches the system technical manual specifications before deployment.\u003c\/p\u003e\n\u003cp\u003eQ: Can this PCB be serviced at the component level?\u003c\/p\u003e\n\u003cp\u003eA: No. Due to the complexity of the multilayer board and the potential for firmware-sensitive components, the module is classified as a line-replaceable unit (LRU).\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the control rack is isolated from power before attempting to remove or install the board to prevent potential damage to the backplane pins.\u003c\/li\u003e\n\u003cli\u003eUse appropriate electrostatic discharge (ESD) mitigation protocols, including a grounded wrist strap, when handling the PCB to protect sensitive integrated circuitry.\u003c\/li\u003e\n\u003cli\u003eAlign the board carefully with the rack-mounted guides to ensure the backplane connectors seat evenly without lateral stress.\u003c\/li\u003e\n\u003cli\u003eSecure the front panel fasteners to the rack frame to maintain structural grounding and provide long-term vibration resistance.\u003c\/li\u003e\n\u003cli\u003eVerify that diagnostic status LEDs, if equipped, indicate normal operational status after the system powers on and initializes communication with the processor.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52507100053816,"sku":"IS200AEPBH1B","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200AEPBH1BAA151X1225EK01PC041.jpg?v=1765177603","url":"https:\/\/www.automodulexpert.com\/products\/is200aepbh1b-general-electric-pcb-board-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}