{"product_id":"is200aepch2cec-general-electric-pcb-board-new-original-stock","title":"IS200AEPCH2CEC General Electric PCB Board | New \u0026 Original Stock","description":"\u003cp\u003eConfigured for signal interface and control logic processing within GE Fanuc turbine control platforms, the \u003cstrong\u003eGeneral Electric IS200AEPCH2CEC\u003c\/strong\u003e (\u003cstrong\u003eIS200AEPCH2CEC\u003c\/strong\u003e PCB Board) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IS200AEPCH2CEC identifier defines the specific hardware baseline for this control interface board. The \"H2CEC\" suffix denotes the revision level, incorporating stabilized signal pathing and component layouts designed to meet Mark VI system signal integrity requirements. This unit operates as a dedicated processor and interface card within the rack-mounted control assembly.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200AEPCH2CEC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric (GE Fanuc)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Mark VI PCB form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem-dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent Type\u003c\/td\u003e\n\u003ctd\u003eSignal Processing Interface Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe IS200AEPCH2CEC facilitates data exchange across the Mark VI backplane bus, serving as a gateway for control signal traffic. It supports high-speed backplane bus communication velocity to ensure real-time responsiveness for turbine regulation. Firmware flash compatibility is managed by the system controller, which pushes configuration logic to the board during boot sequences or maintenance cycles. The PCB layout maintains high impedance isolation to minimize signal noise during high-speed data transmission across the backplane.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is this board field-repairable at the component level?\u003c\/p\u003e\n\u003cp\u003eA: No. Due to the precision nature of the multilayer PCB and the specific firmware-loaded components, component-level repair is not recommended. The board is designed as a line-replaceable unit (LRU).\u003c\/p\u003e\n\u003cp\u003eQ: Does this module require specific backplane slot configuration?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The IS200AEPCH2CEC must be installed in the slot designated for the specific I\/O pack or controller interface it is intended to support; incorrect slot placement may result in communication bus errors.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the control rack is powered down or configured for hot-swapping before installation, per the site's safety standard operating procedure.\u003c\/li\u003e\n\u003cli\u003eHandle the PCB only by the edges or the extraction handles to prevent electrostatic discharge (ESD) damage to sensitive integrated circuits.\u003c\/li\u003e\n\u003cli\u003eAlign the board with the rack guides and ensure the backplane connectors are seated firmly without excessive mechanical force.\u003c\/li\u003e\n\u003cli\u003eSecure the front panel fasteners to the rack frame to ensure structural grounding and prevent vibration-induced dislodgement.\u003c\/li\u003e\n\u003cli\u003eVerify that diagnostic LEDs indicate a normal \"Ready\" or \"Run\" state after power-up to confirm communication with the system processor.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52507099300152,"sku":"IS200AEPCH2CEC","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200AEPCH2CEC.jpg?v=1781511348","url":"https:\/\/www.automodulexpert.com\/products\/is200aepch2cec-general-electric-pcb-board-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}