{"product_id":"is200dspxh1dbd-ge-mark-vi-dsp-control-board","title":"IS200DSPXH1DBD GE Mark VI DSP Control Board","description":"\u003ch2\u003eGE IS200DSPXH1DBD Mark VI Digital Signal Processor Control Board\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE IS200DSPXH1DBD\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS200DSPX\u003c\/strong\u003e Digital Signal Processor Control Board, operates as a dedicated hardware component for motor and bridge regulation, gate drive functions, and field control within GE Mark VI platforms. This module processes high-speed digital signals directly to handle excitation feedback loops and drive gating logic. By executing real-time algorithms onboard, the card maintains tight regulation over generator field parameters without placing excessive computational loads on the main controller rack.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200DSPXH1DBD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e190 mm x 120 mm x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e15 W (Nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Type\u003c\/td\u003e\n\u003ctd\u003eDigital Signal Processor Control Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Platform\u003c\/td\u003e\n\u003ctd\u003eMark VI Turbine Control System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eEX2100 Exciter Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network and Firmware Synchronization\u003c\/h3\u003e\n\u003cp\u003eThe module maintains stable deterministic network execution across the backplane to deliver precise gate pulse timing for connected power electronic bridges. Integrated firmware flash compatibility enables seamless revision alignment with EX2100 control firmware stacks, ensuring legacy backward revision support across updated backplane revisions. High-speed signal processing routines prevent bus contention and eliminate jitter in critical control loops.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the IS200DSPXH1DBD communicate gate drive commands to power bridges? A: The board sends high-speed digital gate signals across dedicated rack backplane connections directly to bridge driver interfaces, keeping pulse timing jitter within microsecond tolerances.\u003c\/p\u003e\n\u003cp\u003eQ: What power requirements are needed from the rack backplane for this processor board? A: The module draws its operating power directly from the regulated Mark VI backplane power rail, taking approximately 15 W under nominal operating loads.\u003c\/p\u003e\n\u003cp\u003eQ: Can this DSP board be replaced while the host system remains online? A: Technicians must power down the specific card slot or de-energize the local rack segment before board removal, as unbuffered hot-plugging can corrupt active digital gate drive signals.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eBefore installing the module, shut down power to the target rack enclosure to prevent voltage surges across the sensitive backplane pin array. Carefully align the card edges with the plastic guide rails of the standard relay rack, sliding the assembly inward until the rear multi-pin connectors mate securely with the backplane socket. Seat the board fully by pushing firmly on the metal faceplate handles and tightening the top and bottom mounting screws to establish a stable mechanical ground connection.\u003c\/p\u003e\n\u003cp\u003eRoute all external sensor and feedback wiring away from high-voltage field cables to avoid electromagnetic interference on sensitive signal paths. Connect all shield conductors to the main system grounding bus bar using short, low-impedance drain leads rather than chaining them through adjacent terminal blocks. Personnel must wear a grounded ESD wrist strap throughout the entire installation to prevent static damage to onboard DSP microchips and logic circuits.\u003c\/p\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":51225284870456,"sku":"IS200DSPXH1DBD\/DSPXH1D","price":188.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200DSPXH1DBDDSPXH1D.jpg?v=1760160632","url":"https:\/\/www.automodulexpert.com\/products\/is200dspxh1dbd-ge-mark-vi-dsp-control-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}