{"product_id":"is200epctg1azz-general-electric-excitation-control-new-original-stock","title":"IS200EPCTG1AZZ General Electric Excitation Control | New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric IS200EPCTG1AZZ\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS200EPCTG1AZZ\u003c\/strong\u003e Excitation Power Control Terminal Module, operates as a dedicated hardware component for interface and signal conditioning within Mark VIe turbine excitation control systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200EPCTG1AZZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e241 mm x 45 mm x 229 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e24 V DC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e500 V AC RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e8 differential analog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Range\u003c\/td\u003e\n\u003ctd\u003e+\/- 10 V DC or 4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IS200EPCTG1AZZ module utilizes dual IEEE 802.3 compliant Ethernet ports to facilitate high-speed, deterministic data exchange within the Mark VIe I\/O network. Its architecture is optimized for redundant I\/O configurations, ensuring that control data remains synchronized across parallel processing paths. The module manages the conversion and signal conditioning of 8 differential analog inputs, maintaining isolation between field circuits and internal logic to suppress noise and transients. Firmware flash compatibility is supported, allowing for consistent integration into updated system platforms while maintaining the strict timing requirements necessary for turbine excitation stability.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the dual Ethernet interface support auto-negotiation?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the dual Ethernet ports are fully compliant with IEEE 802.3 standards and support auto-negotiation, allowing the module to seamlessly integrate with existing network hardware and maintain optimal link speed for control traffic.\u003c\/p\u003e\n\u003cp\u003eQ: How is the input range configured for the 8 differential channels?\u003c\/p\u003e\n\u003cp\u003eA: The input range is configurable via the system controller software. Each of the 8 channels can be individually set to accept either +\/- 10 V DC or 4-20 mA signals, providing the necessary flexibility for various sensor types used in excitation monitoring.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the excitation power source is fully isolated and locked out to prevent accidental activation.\u003c\/li\u003e\n\u003cli\u003eMount the module onto a standard DIN rail, ensuring the locking mechanism is securely engaged for vibration resistance.\u003c\/li\u003e\n\u003cli\u003eTerminate all analog field wiring to the signal inputs, ensuring that shielded cables are properly grounded at the terminal interface to maintain 500 V AC RMS isolation.\u003c\/li\u003e\n\u003cli\u003eConnect the dual Ethernet cables to the communication ports, securing the connectors to ensure reliable data path integrity.\u003c\/li\u003e\n\u003cli\u003eInspect all connections for mechanical stress and confirm that the module is properly seated to ensure effective heat dissipation across the internal circuitry.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52483316646200,"sku":"IS200EPCTG1AZZ","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS215VCMIH2B_1d0fb722-5b1e-497b-9d05-56c88dd146fd.jpg?v=1780905032","url":"https:\/\/www.automodulexpert.com\/products\/is200epctg1azz-general-electric-excitation-control-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}