{"product_id":"is200eroch1add-general-electric-exciter-regulator-card-new-original-stock","title":"IS200EROCH1ADD General Electric Exciter Regulator Card | New \u0026 Original Stock","description":"\u003cp\u003eConfigured for excitation control signal management in Mark VIe turbine control networks, the \u003cstrong\u003eGeneral Electric IS200EROCH1ADD\u003c\/strong\u003e (\u003cstrong\u003eIS200EROCH1\u003c\/strong\u003e Exciter Regulator Options Card) provides direct physical\/electrical execution. This hardware component serves to interface auxiliary excitation feedback signals with the primary excitation regulator processor, ensuring precise voltage and current regulation loop stability.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200EROCH1ADD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e14.75 cm x 9.50 cm x 3.50 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e8 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Type\u003c\/td\u003e\n\u003ctd\u003eExciter Regulator Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eStandard Control Cabinet Slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFirmware Flash Compatibility and Bus Communication\u003c\/h3\u003e\n\u003cp\u003eThe module utilizes internal logic pathways to maintain synchronization with the controller backplane bus communication velocity. Firmware flash compatibility is strictly governed by the revision state of the host excitation regulator; mismatching the card firmware with the master controller version can result in communication fault registers or loss of regulation loop lock. The module handles high-frequency data sampling necessary for excitation control, and the throughput is dictated by the deterministic timing cycles of the Mark VIe I\/O communication backplane.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IS200EROCH1ADD support live insertion and removal (hot-swap) in an active cabinet?\u003c\/p\u003e\n\u003cp\u003eA: Hot-swap capability is supported within the Mark VIe architecture; however, the associated exciter control loop must be in a manual or standby state, and the processor must be logically configured to ignore incoming signals from the specific slot prior to module extraction to prevent trip conditions.\u003c\/p\u003e\n\u003cp\u003eQ: How should the module be addressed if communication timeouts occur after a firmware update?\u003c\/p\u003e\n\u003cp\u003eA: Verify that the firmware flash compatibility matches the current version of the primary controller. If timing errors persist, check the backplane physical connection for oxidation or seating issues that might impede the communication bus velocity.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Precautions:\u003c\/strong\u003e Utilize a grounded ESD wrist strap when handling the card to prevent damage to sensitive CMOS components on the PCB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot Alignment:\u003c\/strong\u003e Slide the module into the designated cabinet slot until the locking levers are fully engaged; do not apply excessive force if the card does not seat naturally, as this indicates potential obstruction in the backplane connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Ensure that the mounting bracket makes clean metal-to-metal contact with the cabinet frame to establish a low-impedance ground path for EMI suppression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Cabling:\u003c\/strong\u003e Route excitation feedback and logic signals away from high-current power cables to prevent electromagnetic noise induction, which can degrade signal measurement accuracy.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52493444317496,"sku":"IS200EROCH1ADD","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200VRTDH1D.jpg?v=1780990994","url":"https:\/\/www.automodulexpert.com\/products\/is200eroch1add-general-electric-exciter-regulator-card-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}