Configured for pulse-width modulation exciter regulation in EX2100 control systems, the General Electric IS200ERSCG2A (IS200ERSG2A Exciter Regulator) provides direct electrical execution for field discharge and DC-link power management.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200ERSCG2A |
| Brand | General Electric |
| Origin | USA |
| Weight | 0.3kg |
| Dimensions | Not specified |
| Operating Temp | Standard industrial ambient range |
| Power Consumption | Not specified |
| Switching Components | 6 x IGBTs |
| Communication | Serial / Ethernet Modbus |
| Operating Modes | Simplex / Redundant |
PLC and Control Deterministic Networks
The IS200ERSCG2A integrates into the EX2100 architecture via deterministic communication channels, requiring precise synchronization with the host controller to maintain loop stability. The module supports firmware flash compatibility, allowing for updates to the internal logic governing PWM timing and protection thresholds. To ensure reliable performance, the backplane bus communication velocity must be configured to match the polling rate of the master controller. Engineers should verify that the firmware revision on the IS200ERSCG2A is compatible with the existing ERDD, ERRR, ERBP, ERRB, and ERIO board revisions within the same rack.
Frequently Asked Questions
Q: Is this controller capable of operating in a TMR configuration?
A: Yes, the IS200ERSCG2A supports both simplex and redundant operating modes. When integrated into a redundant system, proper synchronization of the pulse-width modulation signals across all active modules is required to prevent differential current flow in the exciter field.
Q: Can the internal relays be replaced if they fail?
A: No. The IS200ERSCG2A is a sealed hardware component. In the event of a relay or IGBT failure, the entire module must be replaced to ensure system integrity and compliance with safety standards.
Field Installation Guidelines
- Ensure the control system is fully de-energized before mounting the module in the EX2100 rack.
- Confirm the module is firmly seated in the slot to establish solid contact with the backplane connectors.
- Tighten the front-panel retaining screws to maintain mechanical stability and proper grounding connection to the chassis.
- Verify the integrity of the communication cables (Serial or Ethernet Modbus) before restoring power to the exciter cabinet.
- Perform a check of the DC-link charging resistor bypass circuitry to ensure no pre-charge faults exist before initiating field excitation.
| Quick Quotes | Receive price & availability FAST from our dedicated customer service team. |
|---|---|
| Delivery | Expedited, Freight, And International Shipping Available. |
| Condition | 100% New with Original Package |
| Payment | We accept American Express, Discover, MasterCard, PayPal, and Visa. Our site is secured by RapidSSL. |
| Shipping Port | ShangHai, Xiamen |
| Warranty | 12 Months |
| Q: Is Our Pricing Competitive? |
| A: Yes, we collaborate with over 50 countries worldwide. As a top supplier in China, we offer significant discounts based on market trends. |
| Q: What Is the Warranty Period? |
| A: All our new and original products come with a standard one-year warranty. |
| Q: What Payment Methods Do We Accept? |
| A: We require 100% T/T (Telegraphic Transfer) payment before shipping. For items with a lead time, a 30% deposit is needed upfront, and the remaining 70% is due before shipping. If you have a representative in China, you can arrange an RMB transfer through them. |
| Q: What Shipping Methods Do We Use? |
| A: We primarily use FedEx, DHL, UPS, and BRE for shipping. If you have an account with any of these carriers, you can handle shipping directly. We also offer free shipping to China-based freight forwarders. |
| Q: What Is Our Delivery Time? |
| A: Delivery usually takes 1-3 days after receiving the initial payment. For items with a lead time, shipping will occur according to the specified schedule. |
| Q: How Do We Package the Goods? |
| A: We ensure safe packaging with multiple layers of protection. Products are first placed in their original boxes and sealed with labels. A layer of bubble wrap is then added for collision protection during transit. Finally, the items are packed securely in durable boxes. |
| Q: How Can Customers Contact Us and Request a Quote? |
| A: You can reach out to us via email, WhatsApp, WeChat, Skype, or your preferred communication platform. Contact us with your needs, and we'll provide a prompt, customized quote. |
Recently Viewed
Express Shipping
Extensive Inventory
Quality Assurance
