{"product_id":"is200tregh-ge-termination-board-new-original-stock","title":"IS200TREGH GE Termination Board | New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eGE IS200TREGH\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS200TREGH\u003c\/strong\u003e Termination Board, operates as a dedicated hardware component for field signal distribution within Mark VI control system platforms. This module serves as the primary physical interface for routing high-density discrete and analog signals between external field instrumentation and the controller I\/O packs.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200TREGH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e40 cm x 25 cm x 15 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Function\u003c\/td\u003e\n\u003ctd\u003eField Signal Termination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE IS200TREGH\u003c\/strong\u003e provides the physical infrastructure for backplane bus communication velocity by ensuring consistent impedance paths for low-voltage signal loops. It functions as a foundational component in maintaining the deterministic timing required by Mark VI I\/O packs. While this board operates as a passive termination layer, proper firmware flash compatibility between the connected I\/O packs and the main controller is required to ensure that signal data scaling remains accurate across the network. System integrators should verify that the specific board revision is compatible with the installed I\/O density scaling settings to avoid potential communication errors.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IS200TREGH board require specific software configuration?\u003c\/p\u003e\n\u003cp\u003eA: No, the board itself is a passive termination component and does not contain programmable logic. However, the associated I\/O packs must be configured within the Mark VI toolbox software to recognize the signals terminated at this board.\u003c\/p\u003e\n\u003cp\u003eQ: Can this board be used for high-voltage switching applications?\u003c\/p\u003e\n\u003cp\u003eA: No, this termination board is designed for low-voltage control signals. Ensure that all field inputs strictly adhere to the electrical ratings specified for the Mark VI termination series to prevent hardware damage.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Secure the board onto the DIN-rail or cabinet mounting plate using the designated mounting holes. Ensure adequate clearance for cable management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Terminate field wires firmly into the screw terminals. Ensure wire strands are fully captured within the terminal clamp to maintain a low-resistance connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e Terminate cable shields at the designated ground lugs on the board to provide a path for electromagnetic interference (EMI) dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification:\u003c\/strong\u003e Confirm all connections match the wiring diagrams provided in the system technical manual before applying power to the field loops. Verify signal continuity with a digital multimeter before final commissioning.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52520003502392,"sku":"IS200TREGH","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200TREGH2.jpg?v=1781679434","url":"https:\/\/www.automodulexpert.com\/products\/is200tregh-ge-termination-board-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}