{"product_id":"is200vrtdh1daa-general-electric-analog-input-card-new-original-stock","title":"IS200VRTDH1DAA General Electric Analog Input Card | New \u0026 Original Stock","description":"\u003cp\u003eConfigured for analog signal acquisition in VME backplane control systems, the \u003cstrong\u003eGeneral Electric IS200VRTDH1DAA\u003c\/strong\u003e (\u003cstrong\u003eIS200VRTDH1DAA\u003c\/strong\u003e VME Analog Input Card) provides direct physical and electrical processing of input sensor data for Mark VI control environments.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IS200VRTDH1DAA follows standard GE nomenclature where the \"VRTD\" prefix denotes the module category, \"H1\" designates the hardware revision level, and \"DAA\" reflects the specific firmware and assembly iteration. This card is physically compatible with legacy VME chassis architectures and utilizes standard pin-outs for analog input signal mapping.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200VRTDH1DAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.36 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.1 cm x 18.8 cm x 26.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5 W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Interface\u003c\/td\u003e\n\u003ctd\u003eVME Backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Capability\u003c\/td\u003e\n\u003ctd\u003eAnalog Input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFirmware Flash Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe IS200VRTDH1DAA supports firmware flash compatibility, facilitating seamless integration with existing Mark VI control logic. This architecture allows for system-wide performance adjustments and diagnostic updates without requiring hardware-level modifications. The VME backplane interface provides deterministic communication, ensuring that analog input data is transmitted to the central processor within strictly defined scan times to maintain control loop stability.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is this card rated for hot-swapping within a powered VME chassis?\u003c\/p\u003e\n\u003cp\u003eA: No. Hot-swapping the IS200VRTDH1DAA is not supported. Power must be removed from the VME rack prior to module insertion or removal to prevent electrical transients or backplane bus contention.\u003c\/p\u003e\n\u003cp\u003eQ: What is the recommended maintenance for the gold-plated edge connector pins?\u003c\/p\u003e\n\u003cp\u003eA: Pins should remain free of oxidation and debris. If cleaning is required, use a high-purity isopropyl alcohol solution applied with a lint-free swab. Avoid abrasive materials that may damage the contact plating.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the VME rack power supply is isolated and locked out to prevent accidental activation during installation.\u003c\/li\u003e\n\u003cli\u003eInspect the chassis slot and backplane connector for debris or bent pins before inserting the module.\u003c\/li\u003e\n\u003cli\u003eSlide the card into the chassis guide rails, ensuring the front faceplate remains perpendicular to the rack frame.\u003c\/li\u003e\n\u003cli\u003eApply even pressure to the faceplate to seat the card firmly into the VME backplane connector.\u003c\/li\u003e\n\u003cli\u003eSecure the captive screws on the faceplate to the rack chassis to establish a proper ground connection and prevent vibration-induced dislodgement.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52483317334328,"sku":"IS200VRTDH1DAA","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200VRTDH1D.jpg?v=1780990994","url":"https:\/\/www.automodulexpert.com\/products\/is200vrtdh1daa-general-electric-analog-input-card-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}