{"product_id":"is200vtcch1cbb-is200vtcch1c-general-electric-thermocouple-input-board-new-original-stock","title":"IS200VTCCH1CBB IS200VTCCH1C General Electric Thermocouple Input Board | New \u0026 Original Stock","description":"\u003cp\u003eConfigured for high-precision thermocouple signal acquisition in Mark VI control networks, the \u003cstrong\u003eGeneral Electric IS200VTCCH1CBB\u003c\/strong\u003e (\u003cstrong\u003eIS200VTCCH1C\u003c\/strong\u003e Thermocouple Input Board) provides direct physical signal processing for temperature-sensing loops.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IS200VTCCH1CBB serves as the specific revision of the base IS200VTCCH1C platform. The suffix \"BB\" indicates the hardware build version utilized for standard thermocouple input processing within the Mark VI control architecture.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200VTCCH1CBB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.26 x 4.19 x 12.1 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e12 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Type\u003c\/td\u003e\n\u003ctd\u003eThermocouple (J, K, T, E, R, S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol\u003c\/h3\u003e\n\u003cp\u003eThe IS200VTCCH1CBB facilitates analog front-end processing for field temperature instrumentation. While primarily dedicated to thermocouple millivolt inputs, the board maintains signal integrity through high-impedance input channels designed to interface with control loops. Channel-to-channel isolation is maintained to prevent common-mode noise from affecting thermocouple mV potential, ensuring cold junction compensation (CJC) accuracy across the interface.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IS200VTCCH1CBB support hot-swapping while the Mark VI controller is active?\u003c\/p\u003e\n\u003cp\u003eA: No, module removal or installation must be performed only after the rack power is isolated to prevent damage to the backplane communication pins.\u003c\/p\u003e\n\u003cp\u003eQ: Is external cold junction compensation required for this board?\u003c\/p\u003e\n\u003cp\u003eA: No, the board includes integrated CJC circuitry on the terminal block assembly, which compensates for ambient temperature variations at the point of wire termination.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm the control cabinet is de-energized before mounting the IS200VTCCH1CBB into the VME rack slot.\u003c\/li\u003e\n\u003cli\u003eEnsure the thermocouple extension wires are connected using appropriate polarity; reversing the polarity will result in erroneous temperature readings or negative-going values.\u003c\/li\u003e\n\u003cli\u003eVerify that the shield drain wire for the thermocouple cable is terminated only at the designated chassis ground point to avoid ground loops.\u003c\/li\u003e\n\u003cli\u003eSecure the board using the front-panel captive screws to ensure a solid connection between the board ground plane and the rack chassis.\u003c\/li\u003e\n\u003cli\u003ePost-installation, perform a channel-level calibration check using a precision thermocouple simulator to verify signal conversion accuracy before enabling loop control.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52468545454392,"sku":"IS200VTCCH1CBB IS200VTCCH1C","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200VTCCH1CBB_IS200VTCCH1C.jpg?v=1780560039","url":"https:\/\/www.automodulexpert.com\/products\/is200vtcch1cbb-is200vtcch1c-general-electric-thermocouple-input-board-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}