{"product_id":"is200wcsas1adb-ge-fanuc-speed-control-module-new-original-stock","title":"IS200WCSAS1ADB GE Fanuc Speed Control Module | New \u0026 Original Stock","description":"\u003cp\u003ehe \u003cstrong\u003eGE Fanuc IS200WCSAS1ADB\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS200WCSAS1\u003c\/strong\u003e Speed Control Module, operates as a dedicated hardware component for rotational speed regulation within the Mark VI turbine control system.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIS200\u003c\/strong\u003e: Printed circuit board assembly (Mark VI series).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWCSA\u003c\/strong\u003e: Functional identifier for the Speed Control Module architecture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS1\u003c\/strong\u003e: Version identifier indicating hardware revision level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA\u003c\/strong\u003e: Conformal coating or manufacturing variant code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\u003c\/strong\u003e: Revisions in board-level component sourcing or board layout iterations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200WCSAS1ADB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.45 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e17.8 cm x 33.0 cm x 2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e4.5 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Range\u003c\/td\u003e\n\u003ctd\u003e0.5 Hz to 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Sensitivity\u003c\/td\u003e\n\u003ctd\u003e100 mV AC minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse Time\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 10 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe IS200WCSAS1ADB utilizes a deterministic interface to synchronize with the Mark VI processor backplane. Communication integrity relies on strict adherence to the backplane bus timing requirements to ensure sub-10 ms response latency during turbine overspeed events. Firmware compatibility is governed by the ControlST software suite; users must verify that the installed module firmware version aligns with the specific Mark VI controller rack configuration to prevent bus contention. The module supports integrated communication protocols including Ethernet\/IP and Modbus TCP, facilitating data exchange with auxiliary monitoring stations while maintaining the primary MPU signal processing priority.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the IS200WCSAS1ADB be hot-swapped while the turbine control system is active?\u003c\/p\u003e\n\u003cp\u003eA: No. Removing or inserting the module while the backplane is energized may cause signal transients on the bus or damage the module backplane connectors. Always de-energize the specific rack slot before maintenance.\u003c\/p\u003e\n\u003cp\u003eQ: How is the 1500 VAC channel-to-backplane isolation maintained during high-frequency noise?\u003c\/p\u003e\n\u003cp\u003eA: The module employs onboard galvanic isolation circuitry. Ensure the signal cable shields are grounded at the turbine terminal board and not at the MPU housing to prevent ground loops that could bypass internal isolation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure the Mark VI rack is powered down and the chassis is discharged. Inspect the module for any physical damage or bent connector pins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Insert the module into the designated slot, ensuring it seats firmly into the backplane connector. Secure the module using the top and bottom captive screws to maintain chassis ground continuity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e: Connect Magnetic Pickup (MPU) inputs to the associated terminal board. Use shielded, twisted-pair cabling. Shield termination must occur at the terminal board only to maintain common-mode noise rejection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification\u003c\/strong\u003e: Before startup, verify the gap voltage and signal integrity using an oscilloscope at the terminal board test points to confirm the 100 mV AC minimum threshold is met at minimum operating speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Utilize the ControlST software to define the overspeed trip points and scaling factors in accordance with the specific turbine's rated speed and gear ratio.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52473210765624,"sku":"IS200WCSAS1ADB","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200ERDDH1ABB2.jpg?v=1780560041","url":"https:\/\/www.automodulexpert.com\/products\/is200wcsas1adb-ge-fanuc-speed-control-module-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}