{"product_id":"is210macch1a-general-electric-interface-board-new-original-stock","title":"IS210MACCH1A General Electric Interface Board | New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric IS210MACCH1A\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS210MACC\u003c\/strong\u003e Interface Board, operates as a dedicated hardware component for localized bridge communication and signal processing within Mark VI control platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IS210MACCH1A follows the GE standardized hardware nomenclature. The \"IS210\" prefix identifies the component as part of the MACC board family. The \"MACC\" designator denotes the function as a Main control interface board. The \"H1\" identifies the primary hardware design iteration, while the \"\/A\" suffix indicates the revision level, which dictates compatibility with the specific controller rack backplane and firmware protocol requirements.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS210MACCH1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e12.2 cm x 12.4 cm x 12.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eMain Control Interface Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IS210MACCH1A is engineered for integration into high-speed deterministic control racks, acting as an intermediary for backplane bus communication. It is designed to maintain signal integrity and deterministic timing during high-velocity data transfer between the processor and the local I\/O modules. Firmware flash compatibility is managed via the primary controller to ensure that communication protocols align with the overall system architecture, effectively minimizing latency jitter and ensuring synchronized execution of control logic across the network.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IS210MACCH1A support hot-swapping during system operation?\u003c\/p\u003e\n\u003cp\u003eA: No. The board must be removed from the VME or control rack only after the rack has been isolated from power to prevent damage to the backplane pins or logic circuits from electrostatic discharge.\u003c\/p\u003e\n\u003cp\u003eQ: What are the primary diagnostic indicators to monitor for this board?\u003c\/p\u003e\n\u003cp\u003eA: Diagnostic status is relayed through the primary controller's health register. Users should monitor the board communication status via the WorkstationST software to identify any bridge interface timeouts or parity errors.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eElectrostatic Discharge: Always utilize an anti-static wrist strap connected to a verified ground point when handling the IS210MACCH1A to protect sensitive internal logic components.\u003c\/li\u003e\n\u003cli\u003eMounting Stability: The board must be fully seated within the rack card guides. Verify that the top and bottom ejection levers are fully engaged to ensure secure electrical contact with the backplane connectors.\u003c\/li\u003e\n\u003cli\u003eShielding and Grounding: Ensure that all signal interfaces linked to the board are properly shielded. The shield must be terminated to the cabinet ground bar, not the board signal common, to mitigate electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eCabling Constraints: Avoid placing excessive mechanical stress on the board-mounted connectors. Ensure all ribbon cables are routed through designated cable management paths to prevent fatigue or accidental disconnection.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52496051503416,"sku":"IS210MACCH1A","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS210MACCH1AEF1.jpg?v=1760509083","url":"https:\/\/www.automodulexpert.com\/products\/is210macch1a-general-electric-interface-board-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}