{"product_id":"is215acleh1a-general-electric-application-control-module-new-stock","title":"IS215ACLEH1A General Electric Application Control Module | New Stock","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric IS215ACLEH1A\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS215ACLEH1\u003c\/strong\u003e Application Control Layer Module, serves as the primary microprocessor-based controller utilized to execute excitation control processes across EX2100 and Innovation Series drive platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS215ACLEH1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.65 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25.4 cm x 15.2 cm x 3.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e20 W (Typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Ports\u003c\/td\u003e\n\u003ctd\u003e2 x COM, 2 x Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor Type\u003c\/td\u003e\n\u003ctd\u003eEmbedded Industrial Microprocessor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IS215ACLEH1A maintains high-speed deterministic communication via integrated Ethernet ports, enabling real-time data exchange between the excitation regulator and the supervisory control system. The onboard PCI controllers manage the bus traffic to ensure that drive control packets are processed with minimal jitter. Firmware flash compatibility allows for field-level updates to the BIOS and OS, ensuring the module remains aligned with the required drive control logic and network communication standards.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the function of the RESET switch on the faceplate?\u003c\/p\u003e\n\u003cp\u003eA: The reset switch triggers a hardware-level re-initialization of the processor. It is used during fault handling to clear volatile memory registers and force a reboot of the BIOS\/OS sequence without cycling rack power.\u003c\/p\u003e\n\u003cp\u003eQ: Are the Ethernet ports configured for specific network roles?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The Ethernet ports are designed for deterministic drive control networking. Port assignment and IP configuration must be managed through the drive control software to ensure correct segmentation of the command and feedback data streams.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the control rack power is disconnected before installing the IS215ACLEH1A module to prevent electrical damage to the backplane pins.\u003c\/li\u003e\n\u003cli\u003eCarefully align the module with the drive rack guide rails and press firmly to seat the edge connector into the backplane bus.\u003c\/li\u003e\n\u003cli\u003eSecure the faceplate to the rack frame using the captive screws to ensure proper grounding and mechanical stability.\u003c\/li\u003e\n\u003cli\u003eConnect the required communication cables (COM and Ethernet) to the designated ports. Use shielded Cat 5e\/6 cabling for Ethernet connections to minimize EMI-induced packet loss.\u003c\/li\u003e\n\u003cli\u003eUpon power-up, observe the LED sequence (Active, OK, ENET, Status, Flash). A solid OK indicator confirms successful BIOS POST (Power-On Self-Test) and operational readiness.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52462662025528,"sku":"IS215ACLEH1A","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS215ACLEH1A.jpg?v=1780472878","url":"https:\/\/www.automodulexpert.com\/products\/is215acleh1a-general-electric-application-control-module-new-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}