{"product_id":"is215vcmih2-general-electric-vcmi-board-new-original-stock","title":"IS215VCMIH2 General Electric VCMI Board | New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric IS215VCMIH2\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS215VCMI\u003c\/strong\u003e VME Control Module Interface, operates as a dedicated hardware component for high-speed backplane communication and processor-to-I\/O interface management within Mark VI turbine control platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IS215VCMIH2 follows the GE standardized hardware nomenclature. The \"IS215\" prefix identifies the component as part of the VCMI board family. The \"VCMI\" designator defines the function as a VME Communication Module Interface. The \"H2\" identifies the primary hardware generation, while the lack of additional trailing revisions in this identifier indicates the base production iteration utilized for primary control rack bus arbitration and signal routing.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS215VCMIH2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.56 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.0 cm x 18.6 cm x 26.1 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 12 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eVME Communication Module Interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IS215VCMIH2 is engineered for integration into high-speed deterministic control racks, acting as the primary bridge for data exchange across the VME backplane. It is designed to manage bus arbitration, ensuring that critical control signals and diagnostic data are transmitted between the controller and I\/O modules with minimal latency. Firmware flash compatibility is managed via the controller environment to ensure that the interface remains synchronized with the overall system communication protocol, effectively suppressing jitter and maintaining the deterministic execution of turbine control algorithms.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IS215VCMIH2 support hot-swapping during system operation?\u003c\/p\u003e\n\u003cp\u003eA: No. The board must be removed from the VME control rack only after the rack has been isolated from power to prevent damage to the backplane pins or logic circuits from electrostatic discharge.\u003c\/p\u003e\n\u003cp\u003eQ: What are the primary diagnostic indicators to monitor for this board?\u003c\/p\u003e\n\u003cp\u003eA: Diagnostic status is relayed through the primary controller's health register. Users should monitor the board communication status via the WorkstationST software to identify any bus arbitration errors or interface timeouts.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eElectrostatic Discharge: Always utilize an anti-static wrist strap connected to a verified ground point when handling the IS215VCMIH2 to protect sensitive internal logic components.\u003c\/li\u003e\n\u003cli\u003eMounting Stability: The board must be fully seated within the rack card guides. Verify that the top and bottom ejection levers are fully engaged to ensure secure electrical contact with the backplane connectors.\u003c\/li\u003e\n\u003cli\u003eShielding and Grounding: Ensure that all signal interfaces linked to the board are properly shielded. The shield must be terminated to the cabinet ground bar, not the board signal common, to mitigate electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eCabling Constraints: Avoid placing excessive mechanical stress on the board-mounted connectors. Ensure all internal ribbon cables are routed through designated cable management paths to prevent fatigue or accidental disconnection.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52496073621816,"sku":"IS215VCMIH2","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS215VCMIH22.jpg?v=1781250835","url":"https:\/\/www.automodulexpert.com\/products\/is215vcmih2-general-electric-vcmi-board-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}