{"product_id":"is220pturh1-a-general-electric-turbine-i-o-module-new-original-stock","title":"IS220PTURH1\/A General Electric Turbine I\/O Module | New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric IS220PTURH1\/A\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS220PTURH1\u003c\/strong\u003e Turbine I\/O Module, operates as a dedicated hardware component for high-speed sensor data acquisition and signal processing within Mark VIe turbine control networks.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IS220PTURH1\/A utilizes the GE Mark VIe naming structure. The \"IS220\" prefix identifies the component as a member of the I\/O pack series. The \"PTUR\" designator denotes its specialized function as a turbine-specific input\/output interface. The \"H1\" identifies the primary hardware generation, while the \"\/A\" suffix represents the revision level, dictating the module's compatibility with specific terminal boards and field-side signal processing requirements.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS220PTURH1\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e20.0 cm x 11.5 cm x 5.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-30 deg C to 65 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 12 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eTurbine Sensor I\/O Processing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IS220PTURH1\/A is engineered to operate as a high-density I\/O node within the Mark VIe control architecture. It utilizes an Ethernet-based backbone to facilitate deterministic communication, ensuring that turbine-critical data reaches the controller within sub-millisecond windows. The module supports firmware flash compatibility, allowing for protocol updates without physical hardware replacement. I\/O density scaling is achieved through modular terminal board connections, which allow for the integration of multiple pulse rate and analog sensor inputs while maintaining signal integrity across the backplane bus.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IS220PTURH1\/A support live hot-swapping while the turbine is online?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The module is designed for hot-swapping within a Mark VIe rack, provided the system is configured for redundancy and the maintenance procedure adheres to the specific safety interlocks defined in the turbine control manual.\u003c\/p\u003e\n\u003cp\u003eQ: How does the module handle signal noise for sensitive turbine sensors?\u003c\/p\u003e\n\u003cp\u003eA: The module incorporates on-board filtering and differential signal input architectures to suppress common-mode noise, ensuring accurate capture of pulse rate and frequency signals common in turbine applications.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRack Mounting: Secure the module into the designated slot on the Mark VIe I\/O rack. Ensure the locking latch is fully engaged to maintain reliable contact with the backplane connectors.\u003c\/li\u003e\n\u003cli\u003eGrounding: Ensure the module and its associated terminal board are tied to the common cabinet ground. Proper shielding of input signal cables is mandatory to prevent electromagnetic interference (EMI) from high-power field actuators.\u003c\/li\u003e\n\u003cli\u003eWiring Termination: Use recommended ferrule-type connectors for field wiring. Ensure that all terminal connections are torqued to specifications to prevent intermittent connectivity under thermal expansion or vibration.\u003c\/li\u003e\n\u003cli\u003eEnvironmental Integrity: Keep the I\/O cabinet environment free of conductive dust and excessive moisture. Ensure cabinet fans are operational to prevent localized heating of the module, which could impact the accuracy of high-speed frequency measurements.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52496042459448,"sku":"IS220PTURH1\/A","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS220PTURH1B2.jpg?v=1765176492","url":"https:\/\/www.automodulexpert.com\/products\/is220pturh1-a-general-electric-turbine-i-o-module-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}