Configured for high-speed switching of discrete field devices in Mark VIe control system platforms, the GE IS220YDOAS1A (IS220YDOAS1 I/O Pack) provides direct physical execution of relay or transistorized output commands. This module interfaces between the controller and field-side actuators to provide discrete state control across the system network.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS220YDOAS1A |
| Brand | GE |
| Origin | USA |
| Weight | 0.6 KG |
| Dimensions | 28 cm x 11.5 cm x 4.5 cm |
| Operating Temp | -30 deg C to +65 deg C |
| Power Consumption | 24 VDC (Backplane powered) |
| I/O Type | Discrete Output |
Profinet / EtherNet/IP Deterministic Networks
The IS220YDOAS1A operates within the Mark VIe I/O pack architecture, facilitating deterministic command execution via the internal backplane bus. Communication velocity is maintained through high-speed scan cycles, ensuring that output commands from the processor are reflected at the field terminals with minimal latency. Users must ensure that firmware revisions on the I/O pack are aligned with the controller configuration to maintain network synchronization and prevent potential state-mismatch errors during high-frequency switching operations.
Frequently Asked Questions
Q: Does this module support internal loop monitoring for the output channels?
A: Yes, the I/O pack provides feedback monitoring to verify the state of the output circuit. If a discrepancy between the commanded state and the load current is detected, the module generates a diagnostic alarm for the host controller.
Q: Can the output modules be configured for redundant output operation?
A: In a Triple Modular Redundant (TMR) setup, these modules work in conjunction with the terminal board to provide redundant state control. Ensure the I/O pack hardware and the control software are correctly mapped for the redundant mode to avoid signal voting conflicts.
Field Installation Guidelines
- Isolate all output power circuits and remove system control power before attempting to seat the module in the chassis.
- Inspect the backplane slot for pin alignment; gently slide the module until the locking tabs secure it against the rack.
- Confirm that the terminal board wiring matches the discrete output voltage requirements (typically 24 VDC) to prevent damage to the output drivers.
- Ensure all field cables connected to the terminal interface are properly shielded to prevent noise-induced false states on the discrete output lines.
- Verify the module status via the diagnostic LEDs; a steady green status indicates successful communication with the controller, while red indicators signal an internal fault or loss of communication.
| Quick Quotes | Receive price & availability FAST from our dedicated customer service team. |
|---|---|
| Delivery | Expedited, Freight, And International Shipping Available. |
| Condition | 100% New with Original Package |
| Payment | We accept American Express, Discover, MasterCard, PayPal, and Visa. Our site is secured by RapidSSL. |
| Shipping Port | ShangHai, Xiamen |
| Warranty | 12 Months |
| Q: Is Our Pricing Competitive? |
| A: Yes, we collaborate with over 50 countries worldwide. As a top supplier in China, we offer significant discounts based on market trends. |
| Q: What Is the Warranty Period? |
| A: All our new and original products come with a standard one-year warranty. |
| Q: What Payment Methods Do We Accept? |
| A: We require 100% T/T (Telegraphic Transfer) payment before shipping. For items with a lead time, a 30% deposit is needed upfront, and the remaining 70% is due before shipping. If you have a representative in China, you can arrange an RMB transfer through them. |
| Q: What Shipping Methods Do We Use? |
| A: We primarily use FedEx, DHL, UPS, and BRE for shipping. If you have an account with any of these carriers, you can handle shipping directly. We also offer free shipping to China-based freight forwarders. |
| Q: What Is Our Delivery Time? |
| A: Delivery usually takes 1-3 days after receiving the initial payment. For items with a lead time, shipping will occur according to the specified schedule. |
| Q: How Do We Package the Goods? |
| A: We ensure safe packaging with multiple layers of protection. Products are first placed in their original boxes and sealed with labels. A layer of bubble wrap is then added for collision protection during transit. Finally, the items are packed securely in durable boxes. |
| Q: How Can Customers Contact Us and Request a Quote? |
| A: You can reach out to us via email, WhatsApp, WeChat, Skype, or your preferred communication platform. Contact us with your needs, and we'll provide a prompt, customized quote. |
Recently Viewed
Express Shipping
Extensive Inventory
Quality Assurance
