{"product_id":"mc-taih02-51304453-150-honeywell-experion-sti-input-module","title":"MC-TAIH02 51304453-150 Honeywell Experion STI Input Module","description":"\u003ch2\u003eHoneywell MC-TAIH02 Experion PKS High-Level Analog Input Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell MC-TAIH02\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eMC-TAIH02\u003c\/strong\u003e High-Level Analog Input \/ STI Module (Part Number \u003cstrong\u003e51304453-150\u003c\/strong\u003e), operates as a dedicated hardware component for 16-channel differential analog signal acquisition within Honeywell Experion PKS, TPS, and TDC 3000 control systems. The module converts 4-20 mA current loops and 1-5 VDC voltage inputs into 12-bit digital values while supporting Smart Transmitter Interface (STI) digital communications. System-to-backplane safety and noise immunity are maintained through optical isolation, channel-to-channel isolation, and internal surge protection circuits across an operating envelope of 0 deg C to +60 deg C.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eMC-TAIH02 (PN: 51304453-150)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.35 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e153 mm x 121 mm x 55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;= 5 W typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Channels\u003c\/td\u003e\n\u003ctd\u003e16 differential analog inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Types Supported\u003c\/td\u003e\n\u003ctd\u003e4-20 mA current loop, 1-5 VDC voltage signals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConversion Resolution\u003c\/td\u003e\n\u003ctd\u003e12-bit A\/D conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e250 ohm (current), \u0026gt; 1 Mohm (voltage)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation \u0026amp; Diagnostics\u003c\/td\u003e\n\u003ctd\u003eOptical channel-to-channel and channel-to-bus isolation; surge protection, signal integrity monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental Limits\u003c\/td\u003e\n\u003ctd\u003eStorage: -40 deg C to +85 deg C; Humidity: 5% to 95% RH non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting \u0026amp; Certifications\u003c\/td\u003e\n\u003ctd\u003eDIN rail \/ Honeywell I\/O chassis; CE, UL, FM certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol and Channel-to-Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe MC-TAIH02 module employs channel-to-channel and channel-to-bus optical isolation to decouple field-side measurement loops from sensitive system electronics. Differential input trace paths present a continuous 250 ohm load to standard 4-20 mA current loops while maintaining high input impedance (\u0026gt; 1 Mohm) for 1-5 VDC signals. This isolation structure blocks common-mode voltage spikes and suppresses crosstalk between adjacent analog input channels, preserving signal linearity across Smart Transmitter Interface (STI) digital communication sequences co-located on the same Field Termination Assembly.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the module maintain system stability during online maintenance or module swapping?\u003c\/p\u003e\n\u003cp\u003eA: The MC-TAIH02 supports live hot-swap replacement within active Honeywell I\/O chassis. Dual redundant I\/O link paths maintain uninterrupted bus communication to the host C200 or C300 controller while the hardware field termination assembly isolates power surges during card extraction.\u003c\/p\u003e\n\u003cp\u003eQ: What input impedance characteristics apply when configuring current versus voltage inputs?\u003c\/p\u003e\n\u003cp\u003eA: When landing 4-20 mA current loops, internal precision resistors maintain a 250 ohm input impedance to convert current into readable voltage drops. For direct 1-5 VDC inputs, the circuitry routes signals through high-impedance paths (\u0026gt; 1 Mohm) to prevent signal loading on field transmitters.\u003c\/p\u003e\n\u003cp\u003eQ: What grounding and shielding methods safeguard the 12-bit A\/D converter against noise spikes?\u003c\/p\u003e\n\u003cp\u003eA: Shielded twisted-pair cables must ground at the cabinet entry plate ground bar. The module's internal surge protection network routes high-frequency electrical transients directly through the chassis DIN rail ground connection, preventing ground loop noise from shifting analog-to-digital conversion baselines.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the MC-TAIH02 module directly onto a standard DIN rail or inside the designated Honeywell I\/O rack slot using its compression-style mounting retention clips. Ensure the metallic chassis ground contacts connect firmly to a clean, unpainted DIN rail backplate attached to the main enclosure functional earth bar. Maintain at least 50 mm of vertical clearance above and below the module housing to facilitate natural convection cooling.\u003c\/p\u003e\n\u003cp\u003eRoute field sensor and transmitter lines through dedicated low-voltage wiring troughs, separated from high-voltage AC feeds and switching drive power cables. Terminate signal leads onto the compression screw terminals, verifying correct polarity for 4-20 mA loop-powered or self-powered 1-5 VDC transmitters. Connect cable drain wires to the cabinet instrument ground point only, leaving the field sensor side isolated to avoid ground loops.\u003c\/p\u003e","brand":"HONEYWELL","offers":[{"title":"Default Title","offer_id":51251116867896,"sku":"MC-TAIH02 51304453-150","price":173.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/269.jpg?v=1788332673","url":"https:\/\/www.automodulexpert.com\/products\/mc-taih02-51304453-150-honeywell-experion-sti-input-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}