Configured for precision thermal monitoring in GE Mark VI turbine control platforms, the GE Fanuc DS200TCCBF3BAJ (DS200TCCBF3BAJ Temperature Control Card) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200TCCBF3BAJ |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.35kg |
| Dimensions | Not specified |
| Operating Temp | -40 deg C to +70 deg C |
| Power Consumption | 0.3 A continuous |
| Input Range | -200 deg C to +1300 deg C |
| Channel Count | 8 independent channels |
| Power Supply | 24 VDC +/- 10% |
| Response Time | < 50 ms |
| Vibration Tolerance | 10 G (10–500 Hz) |
Profinet / EtherNet/IP Deterministic Networks
The GE Fanuc DS200TCCBF3BAJ utilizes deterministic network protocols, including Ethernet/IP and Modbus RTU, to communicate thermal data within the Mark VI architecture. The card employs 16-bit A/D conversion to ensure signal integrity across all 8 independent channels. Firmware flash compatibility is governed by the Mark VI backplane bus requirements; firmware updates must be validated against existing controller versions to ensure data acquisition synchronization. The card supports I/O density scaling, allowing for high-resolution monitoring of thermocouple inputs while maintaining real-time response times for thermal events below 50 ms.
Frequently Asked Questions
Q: Does this card support hot-swapping during turbine operation?
A: Yes, the DS200TCCBF3BAJ supports dual-channel hot-swap configurations. Ensure the redundant slot is fully initialized and communicating with the controller before extracting the active module to maintain loop continuity.
Q: How is calibration data maintained during a power cycle?
A: The module utilizes 128 KB of onboard flash storage to retain calibration offsets and configuration parameters, ensuring immediate operational readiness upon power-up.
Field Installation Guidelines
- Mounting: Ensure the card is fully seated in the Mark VI rack slot to establish the required backplane bus connection.
- Thermocouple Wiring: Use appropriate compensation lead wire for the specific thermocouple type (J, K, T, E, R, S) to prevent cold junction errors. Ensure wires are shielded and grounded at a single point to minimize noise.
- Environmental Protection: The module is rated to IP40. In environments with excessive dust or humidity, install the rack within a secondary NEMA-rated enclosure.
- Signal Grounding: Connect the card common to the system earth ground via the rack chassis to prevent common-mode voltage buildup across the sensitive analog input circuits.
| Quick Quotes | Receive price & availability FAST from our dedicated customer service team. |
|---|---|
| Delivery | Expedited, Freight, And International Shipping Available. |
| Condition | 100% New with Original Package |
| Payment | We accept American Express, Discover, MasterCard, PayPal, and Visa. Our site is secured by RapidSSL. |
| Shipping Port | ShangHai, Xiamen |
| Warranty | 12 Months |
| Q: Is Our Pricing Competitive? |
| A: Yes, we collaborate with over 50 countries worldwide. As a top supplier in China, we offer significant discounts based on market trends. |
| Q: What Is the Warranty Period? |
| A: All our new and original products come with a standard one-year warranty. |
| Q: What Payment Methods Do We Accept? |
| A: We require 100% T/T (Telegraphic Transfer) payment before shipping. For items with a lead time, a 30% deposit is needed upfront, and the remaining 70% is due before shipping. If you have a representative in China, you can arrange an RMB transfer through them. |
| Q: What Shipping Methods Do We Use? |
| A: We primarily use FedEx, DHL, UPS, and BRE for shipping. If you have an account with any of these carriers, you can handle shipping directly. We also offer free shipping to China-based freight forwarders. |
| Q: What Is Our Delivery Time? |
| A: Delivery usually takes 1-3 days after receiving the initial payment. For items with a lead time, shipping will occur according to the specified schedule. |
| Q: How Do We Package the Goods? |
| A: We ensure safe packaging with multiple layers of protection. Products are first placed in their original boxes and sealed with labels. A layer of bubble wrap is then added for collision protection during transit. Finally, the items are packed securely in durable boxes. |
| Q: How Can Customers Contact Us and Request a Quote? |
| A: You can reach out to us via email, WhatsApp, WeChat, Skype, or your preferred communication platform. Contact us with your needs, and we'll provide a prompt, customized quote. |
Recently Viewed
Express Shipping
Extensive Inventory
Quality Assurance
