{"product_id":"yokogawa-aai143-s03-16-channel-analog-input-module","title":"Yokogawa AAI143-S03 16-Channel Analog Input Module","description":"\u003ch2\u003eYokogawa AAI143-S03 CENTUM Analog Input Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYokogawa AAI143-S03\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eAAI143\u003c\/strong\u003e Analog Input Module, operates as a dedicated hardware component for 16-channel isolated current signal acquisition within Yokogawa CENTUM DCS platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAAI143-S03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard CENTUM I\/O module footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e3.5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Isolation\u003c\/td\u003e\n\u003ctd\u003eGalvanic isolation per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Type\u003c\/td\u003e\n\u003ctd\u003eCurrent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Range\u003c\/td\u003e\n\u003ctd\u003e4-20 mA DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation \u0026amp; Cold Junction Performance\u003c\/h3\u003e\n\u003cp\u003eThe module implements high-density channel-to-channel galvanic isolation to eliminate ground loop currents and common-mode noise propagation across field wiring runs. Each 4-20 mA DC current channel feeds into an independent analog-to-digital converter circuit with dedicated filtering stage, which effectively isolates potential field surges from the internal CENTUM backplane bus interface. In thermocouple processing configurations across related analog interfaces, internal cold junction compensation (CJC) circuits dynamically track terminal block thermal shifts to maintain measurement integrity without external reference units.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What precautions must be taken regarding backplane bus power consumption when adding multiple AAI143-S03 modules to a single node?\u003c\/p\u003e\n\u003cp\u003eA: Each AAI143-S03 module draws a maximum of 3.5 W from the node power supply. Verify that total node power draw, including field loop power budgets, does not exceed the rated output capacity of the primary and redundant power supply units installed on the CENTUM base plate.\u003c\/p\u003e\n\u003cp\u003eQ: How does channel-to-channel isolation affect module operation during a field loop short circuit?\u003c\/p\u003e\n\u003cp\u003eA: Galvanic channel-to-channel isolation restricts electrical fault propagation strictly to the affected channel loop. A short circuit or voltage transient on channel 1 will not corrupt A\/D conversion or signal conversion integrity on adjacent channels 2 through 16.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure system power to the target node base plate is fully isolated before seating the module into the I\/O slot. Align the module card edge connectors precisely with the backplane guide rails and press firmly until the locking mechanisms engage completely.\u003c\/p\u003e\n\u003cp\u003eFor field instrument connection:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStrip transmitter field wiring to 7 mm and land conductor ends into the designated terminal block positions.\u003c\/li\u003e\n\u003cli\u003eMaintain strict separation between 4-20 mA DC signal cables and high-voltage AC power lines within the enclosure ducting to prevent inductive coupling.\u003c\/li\u003e\n\u003cli\u003eTerminate signal cable shields at a single point on the system earth ground busbar; do not ground shields at both field instrument and control cabinet ends to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003eVerify terminal screw torque specs before applying loop power to prevent high-resistance contact faults.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"YOKOGAWA","offers":[{"title":"Default Title","offer_id":51178860544312,"sku":"AAI143-S03","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/AAI143-S032.jpg?v=1759110117","url":"https:\/\/www.automodulexpert.com\/products\/yokogawa-aai143-s03-16-channel-analog-input-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}