Product Overview

The 100% Brand New GE IC200ALG240-GC acquires analog data from field instruments for the VersaMax I/O system. It converts 4-20mA current or +/-10VDC voltage signals into 16-bit digital values. The module supports 8 isolated channels, open wire detection, and hot-swap capability.

Technical Specifications

•  

  Channels: 8 (Isolated)

   

•  

  Input Ranges: 4-20 mA, +/- 10 VDC

   

•  

  Resolution: 16-Bit

   

•  

  Accuracy: +/- 0.1% Full Scale (@ 25°C)

   

•  

  Update Rate: 20 ms (50Hz), 16.7 ms (60Hz)

   

•  

  External Power: 19.5 - 30 VDC

   

•  

  Backplane Power: 5 VDC @ 15 mA, 3.3 VDC @ 120 mA

   

•  

  Isolation: 1500 VAC Channel-to-Channel, 250 VAC Field-to-Logic

   

•  

  Operating Temp: -40°C to +70°C

   

•  

  Dimensions: 4.3 x 2.63 x 1.96 in (110 x 66.8 x 50 mm)

   

•  

  Weight: 0.20 kg

   

Engineering Advantages

•  

  Software Configurable: Engineers switch between voltage and current modes via software without changing wiring or hardware, adapting to sensor changes instantly.

   

•  

  Channel Isolation: Each channel provides 1500 VAC isolation. This prevents ground loops and contains noise from heavy machinery, ensuring signal integrity in electrically noisy environments.

   

•  

  Live Replacement: The module supports hot-swapping (RIUP). Technicians replace a faulty unit without powering down the rack, minimizing process interruption.

   

•  

  Wire Break Detection: The module identifies open wires in current mode (4-20mA). It alerts the controller to failed loops immediately, preventing uncontrolled process states.

   

FAQs

•  

  Does this module require external power?

  Yes. While logic runs on backplane power, the analog inputs require an external 24VDC supply (19.5-30V) connected to the terminal base to drive field loops.

   

•  

  Can I mix voltage and current inputs on one module?

  No. You configure all 8 channels for either Voltage (-10 to +10V) or Current (4-20mA) mode globally via the software hardware configuration.

   

•  

  Is the "-GC" suffix critical?

  The "-GC" typically denotes specific firmware or country code variations. The module functions as a direct replacement for standard IC200ALG240 units in hardware and wiring.

   

•  

  What terminal base does it use?

  It mounts on standard VersaMax terminal bases like the IC200TBM002 (Box) or IC200TBS002 (Spring), which provide the field wiring connections.