Overview

The 3300 XL 11 mm Proximity Transducer System consists of the following components:

• 3300 XL 11 mm Probe
• 3300 XL 11 mm Extension Cable
• 3300 XL 11 mm Proximitor Sensor

The 3300 XL 11 mm Proximitor Sensor is designed to replace the 7200-series 11 mm and 14 mm Transducer Systems. When upgrading from the 7200-series system to the 3300 XL 11 mm system, all components must be replaced with 3300 XL 11 mm components. Additionally, the monitoring system must be updated.

For use with a 3500 Monitoring System, an updated version of the configuration software that lists the 3300 XL 11 mm Transducer System as a compatible option is required. Existing 3300 Monitoring Systems may need a modification to support this system.

Specifications

• Input: Accepts one non-contacting 3300 XL 11 mm Proximity Probe and Extension Cable.

• Power:

  • Requires -17.5 Vdc to -26 Vdc without barriers at 12 mA maximum consumption.
  • -23 Vdc to -26 Vdc with barriers.
  • Operation at more positive voltages than -23.5 Vdc may result in reduced linear range.

• Supply Sensitivity: Less than 2 mV change in output voltage per volt change in input voltage.

• Output Resistance: 50 Ω

• Material: A380 aluminum

• Weight (typical): 255 g (9 oz)

• Operating Temperature: -52°C to +100°C (-62°F to +212°F)

• Storage Temperature: -52°C to +105°C (-62°F to +221°F)

• Relative Humidity:

  • 100% condensing, non-submersible when connectors are protected.
  • Tested to IEC 68-2-3 damp heat.