GE FANUC IC660BBD024 12/24 VDC 32-Circuit Source I/O Block

GE FANUC IC660BBD024 12/24 VDC 32-Circuit Source I/O Block
GE FANUC IC660BBD024 12/24 VDC 32-Circuit Source I/O Block
GE FANUC IC660BBD024 12/24 VDC 32-Circuit Source I/O Block
GE FANUC IC660BBD024 12/24 VDC 32-Circuit Source I/O Block
GE FANUC IC660BBD024 12/24 VDC 32-Circuit Source I/O Block
GE FANUC IC660BBD024 12/24 VDC 32-Circuit Source I/O Block

GE FANUC IC660BBD024 12/24 VDC 32-Circuit Source I/O Block

This IC660BBD024 12/24 VDC 32-Circuit Source I/O Block was manufactured by GE FANUC, In Stock, 100% Guaranteed Brand New and Authentic. Link to More Information

 
Manufacturer:
GE FANUC
Part Number:
IC660BBD024
Country of Origin:
USA
Condition:
New With Original Package
Shipping Port:
ShangHai, Xiamen
Warranty:
12 Months
 

Overview

A DC 32-Circuit Source/Sink I/O Block is an intelligent, configurable module designed to connect controllers to devices that transmit or receive binary signals. These blocks are versatile and compatible with a wide range of input devices, including both 2-wire and 3-wire electronic proximity switches.

The outputs are suitable for controlling low-power devices such as relays, contactors, and indicator lamps. Two models are available:

  • 12/24 VDC 32-Circuit Source Block (IC66*BBD024): Supplies current to field output devices.
  • 5/12/24 VDC 32-Circuit Sink Block (IC66*BBD025): Receives current from field output devices.

Block Specifications

  • Size (Height x Width x Depth): 8.83" (22.43 cm) x 3.58" (9.1 cm) x 4.7" (11.94 cm)
  • Weight: 4 lbs. (1.8 kg)
  • LEDs (I/O Block): Unit OK, I/O Enabled
  • LEDs (Each Circuit): Individual logic side indicators
  • Block to Block Isolation: 850V
  • Heat Dissipation:
    • Minimum: 11W with 8 inputs
    • Maximum: 18W with 32 outputs at 0.5 Amps
  • Operating Voltage (One Source):
    • 10 to 30 VDC (12/24 V supply)
    • 4.9 to 5.3 VDC (5 V supply, sink only)
    • Absolute instantaneous limit
  • Ripple (Maximum):
    • 10% (12/24 volts)
    • 1% (5 volts)
  • Required DC Power:
    • Typical: 150 mA
    • Maximum: 300 mA
  • Power Supply Dropout Time:
    • 4 ms at 12 volts
    • 20 ms at 24 volts

Input Specifications

  • Input Voltage Relative to DC:
    • Source Blocks:
      • 12 VDC supply: 8-12 VDC (Input ON), 0-6 VDC (Input OFF)
      • 24 VDC supply: 18-24 VDC (Input ON), 0-12 VDC (Input OFF)
  • Input Impedance (Typical): 3.3K Ohms
  • Input Processing Time (Typical): 1.4 ms (plus selectable filter delay)
  • Selectable Input Filter Times: 1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 60, 70, 80, 90, or 100 ms

Output Specifications

  • Maximum Output Current (Steady State): 0.5 Amps per circuit
  • Maximum Inrush Current: 4 Amps up to 10 ms (once every 0.5 seconds maximum)
  • Block Output Current (Total): 16 Amps
  • Output OFF Leakage Current: 10 µA, maximum
  • Output Turn-On Delay: 0.5 ms, maximum
  • Output Voltage Drop: 2.0 volts maximum at 4 Amps inrush
  • Output Diagnostics: Switch Fault

Environmental Specifications

  • Operating Temperature: 0°C to +60°C (32°F to +140°F)
  • Storage Temperature: -40°C (-40°F) to +100°C (+212°F)
  • Humidity: 5% to 95% (non-condensing)
  • Vibration:
    • 5-10 Hz: 0.2" (5.08 mm) displacement
    • 10-200 Hz: 1G
Brze ponude Brzo primite cenu i dostupnost od našeg posvećenog tima za korisničku podršku.
Isporuka Dostupna je ubrzana, teretna i međunarodna dostava.
Stanje 100% novo sa originalnim pakovanjem
Plaćanje Prihvatamo American Express, Discover, MasterCard, PayPal i Visa. Naš sajt je zaštićen RapidSSL-om.
Luka za isporuku Šangaj, Sjamenu
Garancija 12 meseci
Q: Da li su naše cene konkurentne?
A: Da, sarađujemo sa preko 50 zemalja širom sveta. Kao vodeći dobavljač u Kini, nudimo značajne popuste u skladu sa tržišnim trendovima.
Q: Koji je garantni rok?
A: Svi naši novi i originalni proizvodi dolaze sa standardnom garancijom od jedne godine.
Q: Koje metode plaćanja prihvatamo?
A: Zahtevamo 100% T/T (telegrafski transfer) uplatu pre slanja. Za artikle sa rokom isporuke, potrebno je unapred uplatiti 30% depozita, a preostalih 70% pre slanja. Ako imate predstavnika u Kini, možete preko njega organizovati RMB transfer.
Q: Koje metode isporuke koristimo?
A: Pretežno koristimo FedEx, DHL, UPS i BRE za isporuku. Ako imate nalog kod nekog od ovih prevoznika, možete direktno organizovati slanje. Takođe nudimo besplatnu dostavu do špeditera sa sedištem u Kini.
Q: Koje je naše vreme isporuke?
A: Isporuka obično traje 1-3 dana nakon prijema početne uplate. Za artikle sa rokom isporuke, slanje će se obaviti prema navedenom rasporedu.
Q: Kako pakujemo robu?
A: Obavezujemo se na bezbedno pakovanje sa višeslojnom zaštitom. Proizvodi se prvo stavljaju u originalne kutije i zapečate etiketama. Zatim se dodaje sloj mehurićaste folije za zaštitu od udara tokom transporta. Na kraju, predmeti se sigurno pakuju u čvrste kutije.
Q: Kako kupci mogu da nas kontaktiraju i zatraže ponudu?
A: Možete nas kontaktirati putem e-pošte, WhatsApp-a, WeChat-a, Skype-a ili vaše omiljene komunikacione platforme. Obratite nam se sa vašim potrebama, i pružićemo vam brzu, prilagođenu ponudu.
 

Nedavno pregledano

Express Shipping icon
Ekspresna dostava
Brza isporuka za vaše hitne zahteve.
Large stock icon
Opsežan inventar
Veliki lager za trenutnu isporuku.
Quality Assurance Icon
Osiguranje kvaliteta
Autentične, vrhunske PLC i DCS komponente.
Global Service icon
Globalna usluga
Podrška klijentima širom sveta sa pouzdanom uslugom.