PLC Interface Module Yokogawa S2EN501-S00030

PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030

PLC Interface Module Yokogawa S2EN501-S00030

This S2EN501-S00030 PLC Interface Module was manufactured by YOKOGAWA, In Stock, 100% Guaranteed Brand New and Authentic. Link to More Information

 
Manufacturer:
YOKOGAWA
Part Number:
S2EN501-S00030
Product type:
Country of Origin:
Japan
Condition:
New With Original Package
Shipping Port:
ShangHai, Xiamen
Warranty:
12 Months
 

Product Description

The S2EN501-S00030 is a high-performance communication interface module engineered for integration with Yokogawa STARDOM and CENTUM series controllers. It functions as a critical networking bridge that enables synchronized data exchange within distributed control system (DCS) architectures.

Designed for high-availability industrial environments, the S2EN501-S00030 supports redundant network configurations, ensuring uninterrupted communication and preventing data loss during critical process operations. Its optimized hardware architecture enables low-latency communication between CPU units and remote I/O nodes, helping maintain stable control performance in complex automation systems.

With built-in diagnostic indicators and industrial-grade network protection, this module enhances system reliability while simplifying troubleshooting and maintenance in large-scale automation deployments.

Technical Specifications

Parameter Specification
Model Number S2EN501-S00030
Module Type Ethernet Communication / Interface Module
Protocol Support V net, Ethernet/IP, Modbus TCP/IP
Redundancy Support Dual-redundant configuration for fail-safe operation
Data Rate 10/100 Mbps auto-sensing high-speed transmission
Power Consumption Low-power industrial design (typically <0.5A at 5V DC)
Connectivity Dual RJ45 or dedicated bus interface connectors
Isolation Voltage 500V AC signal-to-ground isolation
Status Indicators LED diagnostics for Link, Activity, and Hardware Status
Operating Temperature -20°C to +70°C

Application Scenarios

The S2EN501-S00030 communication module is commonly deployed in industrial sectors where continuous operation and data reliability are critical, including power generation plants, water treatment facilities, petrochemical processing units, and large-scale manufacturing systems.

Within these environments, the module manages high-speed communication between central controllers and distributed field devices, enabling real-time monitoring, diagnostics, and control actions. It is particularly valuable when expanding existing Yokogawa PLC or DCS racks, allowing engineers to integrate modern Ethernet-based networking into established control infrastructures.

FAQ

Q: Does the S2EN501-S00030 require specific firmware versions for installation?
A: Yes. Compatibility depends on the controller’s current Revision (Rev) level and system firmware. It is recommended to verify that the system software version supports the module’s hardware revision to ensure full functionality.

Q: Is this module hot-swappable?
A: The S2EN501-S00030 supports redundant system configurations that allow maintenance with minimal system disruption. However, installation or removal should always follow the backplane safety procedures and system maintenance guidelines specified for the controller platform.

Brze ponude Brzo primite cenu i dostupnost od našeg posvećenog tima za korisničku podršku.
Isporuka Dostupna je ubrzana, teretna i međunarodna dostava.
Stanje 100% novo sa originalnim pakovanjem
Plaćanje Prihvatamo American Express, Discover, MasterCard, PayPal i Visa. Naš sajt je zaštićen RapidSSL-om.
Luka za isporuku Šangaj, Sjamenu
Garancija 12 meseci
Q: Da li su naše cene konkurentne?
A: Da, sarađujemo sa preko 50 zemalja širom sveta. Kao vodeći dobavljač u Kini, nudimo značajne popuste u skladu sa tržišnim trendovima.
Q: Koji je garantni rok?
A: Svi naši novi i originalni proizvodi dolaze sa standardnom garancijom od jedne godine.
Q: Koje metode plaćanja prihvatamo?
A: Zahtevamo 100% T/T (telegrafski transfer) uplatu pre slanja. Za artikle sa rokom isporuke, potrebno je unapred uplatiti 30% depozita, a preostalih 70% pre slanja. Ako imate predstavnika u Kini, možete preko njega organizovati RMB transfer.
Q: Koje metode isporuke koristimo?
A: Pretežno koristimo FedEx, DHL, UPS i BRE za isporuku. Ako imate nalog kod nekog od ovih prevoznika, možete direktno organizovati slanje. Takođe nudimo besplatnu dostavu do špeditera sa sedištem u Kini.
Q: Koje je naše vreme isporuke?
A: Isporuka obično traje 1-3 dana nakon prijema početne uplate. Za artikle sa rokom isporuke, slanje će se obaviti prema navedenom rasporedu.
Q: Kako pakujemo robu?
A: Obavezujemo se na bezbedno pakovanje sa višeslojnom zaštitom. Proizvodi se prvo stavljaju u originalne kutije i zapečate etiketama. Zatim se dodaje sloj mehurićaste folije za zaštitu od udara tokom transporta. Na kraju, predmeti se sigurno pakuju u čvrste kutije.
Q: Kako kupci mogu da nas kontaktiraju i zatraže ponudu?
A: Možete nas kontaktirati putem e-pošte, WhatsApp-a, WeChat-a, Skype-a ili vaše omiljene komunikacione platforme. Obratite nam se sa vašim potrebama, i pružićemo vam brzu, prilagođenu ponudu.
 

Nedavno pregledano

Express Shipping icon
Ekspresna dostava
Brza isporuka za vaše hitne zahteve.
Large stock icon
Opsežan inventar
Veliki lager za trenutnu isporuku.
Quality Assurance Icon
Osiguranje kvaliteta
Autentične, vrhunske PLC i DCS komponente.
Global Service icon
Globalna usluga
Podrška klijentima širom sveta sa pouzdanom uslugom.