Overview

• The IC694MDL340 is a 120 Volt, 0.5 Amp AC Output Module.
• Provides 16 output points in two isolated groups of eight points each.
• Each group has a separate common, with the two commons not tied together inside the module.
• The groups can be used on different phases of the AC supply or powered from the same supply.
• Each group is protected by a 3 Amp fuse.
• RC snubber protects each output against transient electrical noise on the power line.
• Provides high inrush current, allowing it to control a wide range of inductive and incandescent loads.
• AC power to operate loads must be supplied by the user.
• AC power source is required to operate this module.

Specifications

• Rated Voltage: 120 Volts AC
• Output Voltage Range: 85 to 132 Volts AC, 50/60 Hz
• Outputs per Module: 16 (2 groups of 8 outputs each)

Isolation:

• Field to Backplane: Optical, 250 VAC continuous; 1500 VAC for 1 minute
• Field to Frame Ground: 250 VAC continuous; 1500 VAC for 1 minute
• Group to Group: 250 VAC continuous; 1500 VAC for 1 minute

Output Characteristics:

• Output Current:
  • 0.5 Amp maximum per point
  • 3 Amps maximum per group
• Inrush Current: 20 Amps maximum for one cycle
• Minimum Load Current: 50 mA
• Output Voltage Drop: 1.5 Volts maximum
• Output Leakage Current: 2 mA maximum at 120 Volts AC
• On Response Time: 1 ms maximum
• Off Response Time: 1/2 cycle maximum

Power Consumption:

• 315 mA (all outputs ON) from the 5-Volt bus on the backplane