Description

The IC698CHS009 is a 9-slot rack from GE Fanuc, designed for front or rear mounting in RX7i or Series 90-70 systems. It supports single- and double-width modules, with Slot 0 reserved for power supplies and Slot 1 for CPUs.

Rack Configuration

• Slots: 9 total (Slot 0: Power Supply, Slot 1: CPU)

• Module Spacing: 0.8 in (20.3 mm) per connector

• Module Support: Single-width (1 slot), double-width (2 slots)

• Mounting: Front or rear panel

Functionality

• Slot Sensing: Automatic I/O module addressing

• Bus Management: Daisy-chained interrupt and grant signals

• Connector: J2 with 64-bit/cycle transfer capability

• Compatible Modules: RX7i and Series 90-70

• Power Supply Compatibility: RX7i power supplies supported

Cooling Requirements

• Fan Requirement: Mandatory for modules IC698CPE020, IC698CRE020, IC698PSA350

• Cooling Space: Extra 9 in (23 cm) required between racks

• Fan Options:
   • IC697ACC621: 120 VAC
   • IC697ACC624: 240 VAC
   • IC697ACC644: 24 VDC

Grounding & EMI Protection

• Faceplate Screws: Top/bottom screws required for shielding

• Ground Clips: For Series 90-70 rail contact

• Rack Grounding:
   • Use side-mounted studs and AWG #12 wire
   • Connect power supply GND to rack terminal
   • Connect rack terminal to earth ground

Physical Dimensions

• Height: 283 mm (11.15 in)

• Width: 320 mm (12.6 in)

• Depth: 184 mm (7.25 in)

• Enclosure Requirement: IP54 minimum (open equipment classification)