The GE IS200STCIH6ADD, also cataloged as the IS200STCIH6 Contact Input Terminal Board, operates as a dedicated hardware component for discrete signal acquisition and noise-filtered monitoring within the Mark VIe control system.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200STCIH6ADD |
| Brand | General Electric |
| Origin | USA |
| Weight | 0.3 kg |
| Dimensions | 100 mm x 80 mm x 20 mm |
| Operating Temp | -40 deg C to 70 deg C |
| Input Channels | 24 contact inputs |
| Excitation Voltage | 24 Vdc, 48 Vdc, or 125 Vdc |
| Protocol | Modbus TCP/IP |
| Mounting | DIN-rail or flat panel |
Deterministic Network and Communication Integrity
The IS200STCIH6ADD utilizes Modbus TCP/IP protocol to facilitate communication between field-level discrete inputs and the controller network. The integration relies on optimized backplane bus communication velocity to ensure that the state of all 24 contact inputs is polled with high temporal accuracy. Firmware flash compatibility is supported, allowing for updates to the communication handling logic. The module includes high-density I/O scaling, enabling the aggregation of switches, relays, and sensors while maintaining signal integrity via integrated surge and high-frequency noise filtering.
Frequently Asked Questions
Q: Does the board support field-configurable excitation voltages?
A: Yes, the board is compatible with external 24 Vdc, 48 Vdc, or 125 Vdc excitation sources. The voltage selection must be applied externally based on the specific field device requirements.
Q: How is the RS-232 interface utilized in this board?
A: The 37-pin RS-232 female port is designed for localized diagnostic access or legacy integration, allowing direct monitoring of the Modbus data stream during commissioning or troubleshooting.
Field Installation Guidelines
- Ensure the control system is powered down and the field contact power supply is locked out before installation.
- Secure the board to the DIN-rail or flat panel using the provided mounting holes, ensuring adequate clearance for cabling.
- Terminate field wiring for the 24 contact inputs, ensuring that all conductors are properly ferruled to prevent stray strands from causing shorts at the terminal blocks.
- Route the Modbus TCP/IP communication cabling away from high-voltage AC paths to prevent induced noise in the discrete input signals.
- Verify the excitation voltage at the terminal input points before energizing the board, confirming it matches the specified 24/48/125 Vdc requirement for the field sensors.
| Quick Quotes | Receive price & availability FAST from our dedicated customer service team. |
|---|---|
| Delivery | Expedited, Freight, And International Shipping Available. |
| Condition | 100% New with Original Package |
| Payment | We accept American Express, Discover, MasterCard, PayPal, and Visa. Our site is secured by RapidSSL. |
| Shipping Port | ShangHai, Xiamen |
| Warranty | 12 Months |
| Q: Is Our Pricing Competitive? |
| A: Yes, we collaborate with over 50 countries worldwide. As a top supplier in China, we offer significant discounts based on market trends. |
| Q: What Is the Warranty Period? |
| A: All our new and original products come with a standard one-year warranty. |
| Q: What Payment Methods Do We Accept? |
| A: We require 100% T/T (Telegraphic Transfer) payment before shipping. For items with a lead time, a 30% deposit is needed upfront, and the remaining 70% is due before shipping. If you have a representative in China, you can arrange an RMB transfer through them. |
| Q: What Shipping Methods Do We Use? |
| A: We primarily use FedEx, DHL, UPS, and BRE for shipping. If you have an account with any of these carriers, you can handle shipping directly. We also offer free shipping to China-based freight forwarders. |
| Q: What Is Our Delivery Time? |
| A: Delivery usually takes 1-3 days after receiving the initial payment. For items with a lead time, shipping will occur according to the specified schedule. |
| Q: How Do We Package the Goods? |
| A: We ensure safe packaging with multiple layers of protection. Products are first placed in their original boxes and sealed with labels. A layer of bubble wrap is then added for collision protection during transit. Finally, the items are packed securely in durable boxes. |
| Q: How Can Customers Contact Us and Request a Quote? |
| A: You can reach out to us via email, WhatsApp, WeChat, Skype, or your preferred communication platform. Contact us with your needs, and we'll provide a prompt, customized quote. |
Recently Viewed
Express Shipping
Extensive Inventory
Quality Assurance
