The GE IC200ALG432, also cataloged as the IC200ALG432 Mixed Analog I/O Module, operates as a dedicated hardware component for multi-channel signal conversion and control within VersaMax I/O platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200ALG432 |
| Brand | GE Fanuc |
| Origin | Standardized Manufacturing |
| Weight | Not Specified |
| Dimensions | 100 mm x 80 mm x 20 mm |
| Operating Temp | -40 deg C to 70 deg C |
| Power Consumption | 160 mA total |
| Input Channels | 4 (single-ended) |
| Output Channels | 2 (single-ended) |
| Resolution | 12-bit |
| Update Rate | 0.4 ms |
PLC Deterministic Network Communication and Backplane Integration
The IC200ALG432 integrates into the VersaMax backplane bus to facilitate simultaneous analog data acquisition and output control. The module utilizes high-speed internal conversion logic to ensure deterministic signal processing, maintaining a consistent 0.4 ms update rate. Firmware flash compatibility is managed via the controller to support specific application requirements. Because this module consumes 160 mA from the backplane and requires an external 24 VDC source for analog outputs, users must perform a rigorous backplane power budget calculation to ensure that the cumulative current demand does not exceed the capacity of the system power supply module.
Frequently Asked Questions
Q: Does this module support differential input signals?
A: No, the IC200ALG432 is designed specifically for 4 single-ended analog inputs. Ensure that all connected signal commons are referenced appropriately to maintain the 0 V common mode voltage constraint.
Q: Is external power required for both inputs and outputs?
A: The module requires an external 24 VDC power supply specifically to drive the analog outputs. The input sensing circuitry typically utilizes power derived from the backplane or the associated loop configuration.
Field Installation Guidelines
- Mounting: Snap the module onto the VersaMax carrier. Verify that the module is flush and the backplane connector is fully seated to guarantee secure electrical interface.
- Wiring: Use shielded cabling for all analog inputs and outputs to prevent noise ingress. Connect the shield to a single, high-quality instrument ground point to mitigate electromagnetic interference.
- Voltage Ranges: Ensure field signals are within the defined ±10 VDC input range and –10.24 to +10.24 VDC output range. Exceeding these thresholds may result in signal clipping or permanent damage to the input/output buffer circuitry.
- Status Monitoring: Observe the front-panel LED indicators during startup. A failure to indicate field power or backplane power signifies a connection fault or a potential issue with the external 24 VDC supply.
| Quick Quotes | Receive price & availability FAST from our dedicated customer service team. |
|---|---|
| Delivery | Expedited, Freight, And International Shipping Available. |
| Condition | 100% New with Original Package |
| Payment | We accept American Express, Discover, MasterCard, PayPal, and Visa. Our site is secured by RapidSSL. |
| Shipping Port | ShangHai, Xiamen |
| Warranty | 12 Months |
| Q: Is Our Pricing Competitive? |
| A: Yes, we collaborate with over 50 countries worldwide. As a top supplier in China, we offer significant discounts based on market trends. |
| Q: What Is the Warranty Period? |
| A: All our new and original products come with a standard one-year warranty. |
| Q: What Payment Methods Do We Accept? |
| A: We require 100% T/T (Telegraphic Transfer) payment before shipping. For items with a lead time, a 30% deposit is needed upfront, and the remaining 70% is due before shipping. If you have a representative in China, you can arrange an RMB transfer through them. |
| Q: What Shipping Methods Do We Use? |
| A: We primarily use FedEx, DHL, UPS, and BRE for shipping. If you have an account with any of these carriers, you can handle shipping directly. We also offer free shipping to China-based freight forwarders. |
| Q: What Is Our Delivery Time? |
| A: Delivery usually takes 1-3 days after receiving the initial payment. For items with a lead time, shipping will occur according to the specified schedule. |
| Q: How Do We Package the Goods? |
| A: We ensure safe packaging with multiple layers of protection. Products are first placed in their original boxes and sealed with labels. A layer of bubble wrap is then added for collision protection during transit. Finally, the items are packed securely in durable boxes. |
| Q: How Can Customers Contact Us and Request a Quote? |
| A: You can reach out to us via email, WhatsApp, WeChat, Skype, or your preferred communication platform. Contact us with your needs, and we'll provide a prompt, customized quote. |
Recently Viewed
Express Shipping
Extensive Inventory
Quality Assurance
