The General Electric IS200ERIOH1ACB, also cataloged as the IS200ERIOH1ACB Exciter Regulator I/O Board, operates as a dedicated hardware component for high-speed signal processing and excitation logic management within Mark VI turbine control systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200ERIOH1ACB |
| Brand | General Electric |
| Origin | USA |
| Weight | 0.55 kg |
| Dimensions | 15.2 cm x 25.4 cm x 3.2 cm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 12 W typical |
| Function | Excitation Regulator I/O |
| System Platform | Mark VI |
Profinet / EtherNet/IP Deterministic Networks
The IS200ERIOH1ACB facilitates deterministic communication between the excitation regulator and the control processor. By integrating directly into the Mark VI backplane, the board ensures low-latency execution of excitation control commands and monitoring of generator field feedback. The module supports high-speed signal conditioning, converting raw field data into precise digital inputs for the control logic. Firmware flash compatibility is built into the board's architecture, allowing for field updates to excitation algorithms and diagnostic tracking without the need for hardware replacement, thus maintaining consistent network timing and control loop stability.
Frequently Asked Questions
Q: Does the IS200ERIOH1ACB support hot-swapping during excitation system operation?
A: No, this board is not designed for hot-swapping. The excitation regulator must be disabled and the rack power isolated before the board is removed or installed to prevent electrical damage to the I/O bus or connected field devices.
Q: How can I verify the board's health status via the excitation control interface?
A: The board status is reflected in the diagnostic logs of the Mark VI controller. A functional board will report healthy communication flags; failure to sync or internal logic errors will trigger specific diagnostic alarm codes on the operator interface.
Field Installation Guidelines
- Confirm that the excitation power supply is fully isolated and locked out according to standard safety procedures.
- Align the board with the chassis rails to ensure proper seating into the backplane connector; avoid forcing the board, which could cause pin misalignment.
- Once seated, tighten the captive screws on the faceplate to ensure electrical continuity for the grounding system and structural stability.
- Verify that all field-side I/O connections are properly landed on the terminal block and that cable shields are grounded at the designated common point to suppress EMI.
- Inspect the interface cable connections for secure latching before re-energizing the excitation rack.
| Quick Quotes | Receive price & availability FAST from our dedicated customer service team. |
|---|---|
| Delivery | Expedited, Freight, And International Shipping Available. |
| Condition | 100% New with Original Package |
| Payment | We accept American Express, Discover, MasterCard, PayPal, and Visa. Our site is secured by RapidSSL. |
| Shipping Port | ShangHai, Xiamen |
| Warranty | 12 Months |
| Q: Is Our Pricing Competitive? |
| A: Yes, we collaborate with over 50 countries worldwide. As a top supplier in China, we offer significant discounts based on market trends. |
| Q: What Is the Warranty Period? |
| A: All our new and original products come with a standard one-year warranty. |
| Q: What Payment Methods Do We Accept? |
| A: We require 100% T/T (Telegraphic Transfer) payment before shipping. For items with a lead time, a 30% deposit is needed upfront, and the remaining 70% is due before shipping. If you have a representative in China, you can arrange an RMB transfer through them. |
| Q: What Shipping Methods Do We Use? |
| A: We primarily use FedEx, DHL, UPS, and BRE for shipping. If you have an account with any of these carriers, you can handle shipping directly. We also offer free shipping to China-based freight forwarders. |
| Q: What Is Our Delivery Time? |
| A: Delivery usually takes 1-3 days after receiving the initial payment. For items with a lead time, shipping will occur according to the specified schedule. |
| Q: How Do We Package the Goods? |
| A: We ensure safe packaging with multiple layers of protection. Products are first placed in their original boxes and sealed with labels. A layer of bubble wrap is then added for collision protection during transit. Finally, the items are packed securely in durable boxes. |
| Q: How Can Customers Contact Us and Request a Quote? |
| A: You can reach out to us via email, WhatsApp, WeChat, Skype, or your preferred communication platform. Contact us with your needs, and we'll provide a prompt, customized quote. |
Recently Viewed
Express Shipping
Extensive Inventory
Quality Assurance
